Akai AA-1010 L

Data

General

• Manufacturer: Akai
• Model: AA-1010 L
• Years of manufacture: 1977 - 1979
• Made in: Japan
• Color: black, silver
• Remote control: no
• Power consumption: 100 W
• Dimensions: 440 x 125 x 265 mm (WxHxD)
• Weight: 6.4 kg
• Original price approx.: 700 DM

Connections

• Number of inputs:
  • 1x Phono: 3 mV / 47 kOhm

1x Tape In, Aux, DIN: 150 mV / 100 kOhm

• • Antenna FM (75/300 Ohm) / MW.
• Number of outputs:
  • Tape Out: 150 mV / 100 kOhm

DIN: 30 mV / 180 kOhm

• • Headphones (6.3 mm jack, front)
  • 2 pairs of loudspeakers

Technical Data

Amplifier

• Continuous power (20-20,000 Hz)

8 Ohm: 2x 14 W 4 Ohm: 2x 16 W

• Dynamic power
  • 8 Ohm:
  • 4 Ohm:
• Total harmonic distortion: < 0.8%
• Attenuation factor:
• Frequency response: 15 - 40,000 Hz
• Signal-to-noise ratio: (noise voltage aa.)

Phono: 80 dB Tape, Aux: 90 dB

• Stereo channel separation:
• Tone control:
  • Bass: ±10 dB at 100 Hz

Treble: ±10 dB at 10 kHz

• Loudness: +5/+10 dB (treble/bass)
• High Filter: no
• Low Filter (Subsonic): no

Tuner

• Reception: FM, MW, LW
• Frequencies:
  • FM: 88 - 108 MHz

MW: 520 - 1,605 kHz LW: 150 kHz - 350 kHz

• Frequency response:
• Input sensitivity:
  • FM: 1.5 µV
  • MW: 200 µV / 8 µV (Ext.)

LW: 1 mV Distortion factor:

• • FM: 0.3% (mono), 0.6% (stereo)
• Signal-to-noise ratio:
  • FM: 65 dB

MW: 45 dB

• Channel separation: 40 dB
• Selectivity:
  • FM: > 68 dB
  • MW: > 30 dB

LW: > 30 dB

• Co-wave selection:
• Spurious wave selection:
• IF attenuation:
  • VHF: > 65 dB

MW: > 55 dB LW: > 35 dB IF attenuation:

• • VHF: 70 dB
  • MW: 45 dB
• AM suppression: 70 dB
• Station memory: 5 (for FM)

Special Features

• Receiver with long wave

Remarks

• Other models in the same series:
• Akai AA-1010
• Akai AA-1010 L
• Akai AA-1020
• Akai AA-1020 L
• Akai AA-1030
• Akai AA-1030 L
• Akai AA-1040
• Akai AA-1050
• Akai AA-1150
• Akai AA-1200

Pictures

• Image: Akai AA-1010 L

Reviews