Kenwood TK-50 L
Data[edit]
General
- Manufacturer: Kenwood
- Model: TK-50 L
Type: Receiver
- Years of manufacture: 1965 - 1967
- Made in: Japan
- Color: Silver, sheet metal housing
- Power consumption: 90 W max.
- Dimensions: 420 x 147 x 355 mm (WxHxD)
- Weight: 9.9 kg
- Original price approx.: 220 US-$, 1'048 DM
Connections
- Number of inputs:
- Phono MM: 2 mV, 100 mV max.
Aux: 150 mV
- Tape Play: 150 mV
Tape Play (DIN): 150 mV
- Antenna (FM: 75, 300 ohms, MW: 300 ohms).
- Number of outputs:
- Tape Rec: 150 mV
- Tape (DIN): 30 mV
Central channel output: 150 mV
- Headphones (6.3mm jack)
- 2 pairs of loudspeakers
Technical Data
Amplifier
- Continuous power (at distortion):
- 8 Ohm:
- 4 Ohm: 2x 20 W
- Dynamic power:
- 8 Ohm: 2x 25 W
- 4 Ohm: 2x 30 W
- Total harmonic distortion: < 0.9 %
- Attenuation factor: 20 (8 Ohm, 1 kHz)
- Frequency response:
- Phono, RIAA: 20 - 20'000 Hz
- High level: 20 - 50'000 Hz, ± 1 dB
- Signal-to-noise ratio:
- Phono, RIAA: 60 dB
Tape HD: 60 dB
- High level: 70 dB
- Tone control:
- Bass: ± 10 dB at 100 Hz
Treble: ± 10 dB at 10 kHz
- Loudness: + 9.5 dB at 100 Hz, + 5.5 dB at 10 kHz
- Subsonic:
- High Filter:
- Mute:
Tuner
- Reception: FM, MW, LW
- Frequencies:
- FM: 88 - 108 MHz
MW: 525 - 1605 kHz LW: 150 - 350 kHz
- Input sensitivity:
- FM: 2.0µV
- MW: 15µV
LW: 45µV
- All other specifications for VHF
- Frequency response: 20 - 20'000 Hz, + 1 dB
- Distortion factor:
- < 0.7 % (mono)
- < 0.9 % (stereo)
- Signal-to-noise ratio: 60 dB)
- Channel separation: > 40 dB (1 kHz)
- selectivity: > 48 dB
- Co-wave selection: 2.5 dB
- Spurious wave attenuation: > 40 dB (98 MHz)
- Image frequency attenuation: > 55 dB (98 MHz)
IF attenuation: > 80 dB (90 MHz)
- AM suppression: 50 dB
Remarks[edit]
- Other models in the same series:
- Integrated amplifier:
- Kenwood W-41 U
- Kenwood TK-400 E
- Tuner:
- Kenwood AFX-3 U
- Kenwood TK-500 E
Pictures[edit]
- Picture: Kenwood TK-50 (version with FM only)
- Excerpt from US advertisement: Kenwood TK-50
