Kenwood TK-66 U
Data
General
- Manufacturer: Kenwood
- Model: TK-66 U
- Year of manufacture: 1967 - 1970
- Made in: Japan
- Color: silver, black, wood foil
- Power consumption: 90 W at full output, 20 W without signal
- Dimensions: 420 x 140 x 305 mm
- Weight: 11 kg
- Original price approx.: 59'800 Yen (Japan, 1967), 900 DM
Connections
- Number of inputs:
- Phono: 2 mV
- Tape HD: 2,5 mV
- Aux: 150 mV
- Tape Play:
- Cinch: 150 mV
- DIN: 150 mV
- Antenna: FM (75 Ohm Unbalanced / 300 Ohm Balanced), AM
- Number of Outputs:
- Tape Rec:
- Cinch: 160 mV / 50 kOhm
- DIN: 30 mV
- Tape Rec:
Headphones
- 2 pairs of speakers
Technical Data Tuner Part
- Reception: FM, MW
- Frequencies:
- FM: 88 - 108 MHz
MW: 535 - 1605 kHz
- Frequency response:
- Input sensitivity:
- FM: 2.0µV
- MW: 10µV
- Distortion factor: < 0,6 %
- Signalrauschabstand: >60 dB
- Common mode selection: 2.5 dB
- Channel separation (400 Hz): > 38 dB
- selectivity:
- FM: > 45 dB
MW: > 25 dB
- Co-wave selection:
- FM: > 80 dB
MW: > 25 dB
- Spurious wave selection: > 45 dB
- IF attenuation: 66 dB
- IF attenuation:
- AM suppression:
Amplifier Part Specifications
- Continuous power (at distortion)
- 8 Ohm: 2 x 20 W
- 4 Ohm:
- dynamic power
- 8 Ohm: 50 W (IHF)
- 4 Ohm: 60 W (IHF)
- Total harmonic distortion: < 0.9 % at rated power
- Attenuation factor: 23 at 8 Ohm
- Frequency response: 20 - 50000 Hz (±2 dB)
- Power bandwidth (IHF): 20 - 30000 Hz (0.5% THD, -3 dB)
- Signal-to-noise ratio:
- Phono: 60 dB
Tape HD: 60 dB AUX: 70 dB
- Tape: 70 dB
- Tone control:
- Bass: ± 10 dB at 50 Hz
Treble: ± 10 dB at 10 kHz
- Loudness: + 8 dB / 100 Hz, + 3 dB / 10 kHz
- Low Filter: 80 Hz Cutoff
- High Filter: 6000 Hz Cutoff
Special Features
- Center channel output
- FM Muting
- Mono Stereo Switch
Comments
- Other models in the same series:
- Kenwood TK-40 L
- Kenwood TK-55
- Kenwood TK-66 U
- Kenwood TK-88 U
- Kenwood TK-140 U
- Kenwood TK-140 X
Pictures
- Extract from brochure: Kenwood TK-66 U
Reports
Links
</0,6>