Sanyo Plus 200

Revision as of 07:40, 27 May 2019 by Hapeg2 (talk | contribs)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)

Data[edit]

General

  • Manufacturer: Sanyo
  • Model: Plus 200
  • Model series: Plus Series
  • Type: Receiver
  • Years of manufacture: 1979 - 1981
  • Made in: Japan
  • Color: Silver, housing wood imitation
  • Dimensions (WxHxD): 520 x 132 x 282 mm
  • Weight: approx. 22 kg
  • Original price approx.: 900 US-$, 2'200 DM


Connections

  • Inputs:
    • Phono MM: 2,5mV / 47kOhm, 250 mV max.

Phono MC: 250µV / 100 Ohm, 25 mV max.

    • Tuner: 150mV / 47kOhm

Aux: 150mV / 47kOhm

    • Tape Play 1, 2: 150mV / 47kOhm
    • External Processor In: 150mV / 47kOhm.
  • Outputs:
    • Tape Rec 1, 2: 150mV / 47kOhm
    • External Processor Out: 150mV / 47kOhm
    • Headphones:
    • 3 pairs of speakers


Technical Data

Amplifier

  • Continuous power (at distortion)

8 Ohm: 2 x 200 W (RMS, 20 - 20'000 Hz)

    • 4 Ohm: 2 x 200 W (RMS, 20 - 20'000 Hz)
  • Dynamic power
    • 8 Ohm:
    • 4 Ohm:
  • Total harmonic distortion: 0.009 %
  • Attenuation factor: 60 at 8 Ohm
  • Frequency response:
    • Phono, RIAA: 20 - 20'000 Hz, ± 0,2 dB
    • High level: 7 Hz - 100'000 kHz, + 0 dB, - 1 dB
  • Signal-to-noise ratio:
    • Phono MM: 97 dB
    • Phono MC: 70 dB
    • High level: 110 dB
  • Tone control:
    • Bass: ± 10 dB (at 100 Hz).
      • Tilt frequencies adjustable: 100 Hz, 200 Hz, 400 Hz
    • Mids: ± 6 dB (at 1 kHz)

Treble: ± 10 dB (at 10 kHz)

      • Tilt frequencies adjustable: 2.5 kHz, 5 kHz, 10 kHz
  • Loudness: yes, + 10 dB at 100 Hz, + 3 dB at 10 kHz
  • High Filter: 8 kHz (12 dB/oct)
  • Low Filter (Subsonic): 37 Hz (12 dB/oct)
  • Mute: -20 dB


Tuner

  • Reception: FM/MW
  • Frequencies:
    • FM: 88 - 108 MHz
    • MW: 535 - 1605 KHz
  • Input sensitivity:
    • FM: 1.8µV
    • MW: 15µV
  • Frequency response: 20 - 15'000 Hz (+0,5 dB / -1 dB)
  • Distortion factor:
    • FM Mono Wide: < 0.09% (1 kHz)

FM Mono Narrow: < 0.15% (1 kHz) FM Stereo Wide: < 0.1% (1 kHz)

    • FM Stereo Narrow: < 0.2% (1 kHz)
  • Signal to Noise Ratio:
    • FM (65 dBf): 83 dB (mono), 78 dB (stereo).
    • MW: 55 dB
  • Channel separation: 85 dB (1 kHz)
  • Selectivity:
  • Equal wave selection:
    • Wide: 1.2 dB

Narrow: 1.8 dB

  • Spurious wave selection:
    • FM Wide: 55 dB (± 400 kHz)

FM Narrow: 80 dB (± 400 kHz)

  • Mirror frequency attenuation:
    • FM: 90 dB
    • MW: 40 dB

IF attenuation:

    • FM: 110 dB
    • MW: 40 dB
  • AM suppression: 55 dB


Special Features

  • Phono MM/MC
  • Pre- and power amplifier separable

12 -LED peak value display

    • Display range switchable: x0,01, x0,1, x1


Remarks[edit]












Pictures[edit]

  • Extract from brochure: Sanyo Plus 200

Sanyo Plus 200-Prospekt-2.jpg


Reports[edit]

Links[edit]