Rotel RA-1312
Data
General
- Manufacturer: Rotel
- Model: RA-1312
- Type: Stereo integrated amplifier
- Years of manufacture: 1976 - 1978
- Made in: Japan
- Color: Silver
- Remote control: No
- Power consumption:
- Dimensions: 482 x 180 x 405 mm
- Weight: 17,5 kg
- Original price approx.: 1'648 DM
Connections
- Number of inputs:
- Phono MM 1, 2: switchable 2 mV, 4 mV, 8 mV, switchable 25 kOhm, 50 kOhm, 100 kOhm, max. 300 mV.
- Microphone: 2.8 mV
- Tuner: 150 mV, 50 kOhm, max. 15 V
- Aux 1, 2: 150 mV, 50 kOhm, max. 15 V
- Tape Play 1, 2: 150 mV, 50 kOhm, max. 15 V
- Main In: 1.5 V, 50 kOhm
- Number of outputs:
- Tape Rec 1, 2: 350 mV, 3.3 kOhm.
- Tape Rec DIN: 120 mV, 90 kOhm
- Pre out:
- Headphones:
- 2 pairs of speakers
Technical Data
- Continuous power (at distortion factor)
- 8 Ohm: 2x 80 Watt (20 Hz - 20'000 Hz)
- 4 Ohm: 2x 110 Watt (1 kHz)
- Dynamic power
- 8 Ohm:
- 4 Ohm:
- Frequency response:
- Main In: 5 Hz - 100 kHz, ± 3 dB, 8 Ohm, both channels Power Rating.
- Distortion factor: 0.1
- Attenuation factor: 70 at 8 ohms
- Signal-to-noise ratio:
- Phono MM: 75 dB
- Microphone: 75 dB
High level: 95 dB
- Tone control
- Bass: ± 10 dB at 100 Hz
- Operating frequencies: 200 Hz, 400 Hz
- Bass: ± 10 dB at 100 Hz
Treble: ± 10 dB at 10 kHz
- Operating frequencies: 2.5 kHz, 5 kHz
Loudness: + 10 dB at 100 Hz / + 3 dB at 10 kHz
- High Filter: - 12 dB / octave at 8 kHz
- Low Filter: - 12 dB / octave at 30 Hz
- Low Filter (Subsonic): - 12 dB / octave at 15 Hz
- Muting: 0 dB, - 15 dB
Special Features
- 2 large VU meters
- Microphone mixer
- Tape dubbing
Comments
- Other models in the same series:
- Amplifier:
- Rotel RA-712
- Rotel RA-812
- Rotel RA-1212
- Rotel RA-1312
- Rotel RA-1412
- 5000 series power amplifiers:
- Rotel RB-5000
- Tape Deck:
- Rotel RD-12 F
- Rotel RD-20
- Turntable:
- Rotel RP-1500
- Rotel RP-3000
Pictures
- Image: Rotel RA-1312
Reports
- Report from "Mackers": [[1]]