Jamo TP 100
Data
General
- Manufacturer: Jamo
- Model: TP 100 (identical in construction as R 5000, but without power amplifiers)
- Type: Tuner preamplifier
- Years of manufacture: 1976 - 1980
- Manufactured in: Denmark
- Color: front variants silver / black or black, wooden cabinet
- Remote control: no
- Power consumption: 220 W
- Dimensions: 555 x 117 x 285 mm (WxHxD)
- Weight: 5.8 kg
- Original price approx.: 700 DM
Connections
- Number of inputs:
- Phono MM: 3 mV, 47 kOhm
Aux (DIN): 200 mV, 80 kOhm
- Tape Play (DIN): 200 mV, 470 kOhm
- Antenna (FM: 75, 300 ohms, MW: 300 ohms).
- Number of outputs:
- Tape (DIN): 20 mV, 20 kOhm
- Headphones (6.3mm jack): 1 V, 8 Ohm
- 2 speaker pairs: 4 - 16 Ohm
Technical Data
Preamplifier
- Frequency response:
- phono, RIAA: 30 - 15'000 Hz, ± 0,3 dB
High level: 10 - 40'000 Hz, ± 1 dB Signal-to-noise ratio:
- Phono: 60 dB
- High level: 60 dB
- Tone control:
- Bass: ± 17 dB at 40 Hz
Treble: ± 14 dB at 12.5 kHz
- Loudness: + 10 dB at 40 Hz, + 4 dB at 12.5 kHz
- Subsonic: at 70 Hz, - 12 dB / octave
- High Filter: at 8 kHz, - 12 dB / octave
- Mute:
Tuner
- Reception: FM, MW
- Frequencies:
- FM: 87.5 - 108 MHz
MW: 540 - 1640 kHz
- All other specifications for VHF
- Input sensitivity: 25 µV (46 dB)
- Frequency response: 25 - 15'000 Hz, ± 1,5 dB
- Distortion factor:
- Mono: < 0.3 %
Stereo: < 0.4
- Signal-to-noise ratio:
- Mono: 70 dB
Stereo: 60 dB
- Channel separation: 40 dB (1 kHz)
- selectivity: 60 dB
- Co-wave selection: 1.0 dB
- Spurious wave selection: 80 dB
- Image frequency attenuation: 80 dB
- IF attenuation: 80 dB
- AM suppression: 50 dB
Special Features
- Microphone front input (6.3mm jack)
Remarks
- Preamplifier:
- Jamo ST 50
- Receiver:
- Jamo R 2500
- Jamo R 5000
- Tuner Preamplifier:
- Jamo TP 100
- MFB series active speakers:
- Jamo MFB 90
- Jamo MFB 100
- Jamo MFB 200
- Jamo MFB 300
Pictures
- Picture: Jamo TP-100, R 5000
- Extract from brochure: Jamo R 5000
