Tandberg TR 1040 P
Data
General
- Manufacturer: Tandberg
- Model: TR 1040 P (Version TR-1040 A with medium wave, but without VHF preselection buttons)
Type: Receiver
- Year of manufacture: 1974 - 1977
- Manufactured in: Norway
- Color: silver, wooden case rosewood
- Remote control: no
- Power consumption:
- Dimensions: 440 x 132 x 310 mm (WxHxD).
- Weight: 9,7 kg
- Original price approx.: 1'590 DM
Connections
- Number of inputs:
- Phono MM: 1.8 - 7.2 mV adjustable.
- Tape Play 1, 2, 3: 125 - 500 mV adjustable
AUX: 150 mV / 80 kOhm
- Antenna FM (75/300 Ohm), MW (300 Ohm)
- Number of outputs:
- Tape Rec 1, 2, 3: 50 mV
Tape Rec DIN: 50 mV
- Headphones: 6.3 mm jack
- 2 pairs of loudspeakers
Technical Data
Amplifier
- Continuous power
8 Ohm: 2x 45 W 4 Ohm: 2x 60 W
- dynamic power
- 8 Ohm: 2x 75 W
- 4 Ohm: 2x 100 W
- Total harmonic distortion: 0.2 % (at nominal power)
- Attenuation factor:
- Frequency response: 7 - 70,000 Hz, - 1.5 dB
- Signal-to-noise ratio:
- Phono MM: 78 dB
- AUX, Tape: 94 dB
- Stereo channel separation:
- Phono MM: 60 dB
- AUX, Tape: 60 dB
- Tone control:
- Bass: ±10 dB at 100 Hz
Treble: ±10 dB at 10 kHz
- Loudness: +8/+5 dB (100 Hz/10 kHz)
- High Filter: -10 dB at 10 kHz
- Low Filter (Subsonic): -8 dB at 100 Hz
- Mute: FM Muting
Tuner
- Reception: FM
- Frequencies: 87.5 - 108 MHz
- Frequency response: 20 - 15,000 Hz (+0.5/-1.5 dB, FM)
- Input sensitivity: 1.7 µV (IHF)
- Distortion factor: 0.3% (mono), 0.5% (stereo)
Signal-to-noise ratio: 70 dB (stereo)
- Channel separation: 40 dB (at 1 kHz)
- Selectivity: 80 dB
- Co-wave selection: 1.3 dB
- Spurious wave selection: 100 dB
- Image frequency attenuation: 90 dB
- IF attenuation: 100 dB
- AM suppression: 90 dB
- Preselection of 5 FM program keys
Special Features
- Electronic overload protection
- Preselection of 5 VHF program keys
- 2 measuring instruments
- Connection for 3 tapes
- Output level meter
Remarks
- Other models of the same series:
Pictures
- Image: Tandberg TR-1040
