Nikko STA-1101
Data[edit]
General
- Manufacturer: Nikko
- Model: STA-1101
- Year of manufacture: 1971 - 1973
- Made in: Japan
- Color: Black
- Remote control:
- Power consumption: 250 W max / 30 W rest.
- Dimensions: 470 x 160 x 370 mm (WxHxD)
- Weight: 15 kg
- Original price approx.: 2'000 DM
Connections
- Number of inputs:
- Phono MM: 2.0 mV / 50 kOhm
- Tape, Aux: 200 mV / 100 kOhm
- Microphone: 2,0 mV / 50 kOhm
- Antenna: FM 75/300 Ohm, MW 300 Ohm
- Number of outputs:
- Headphones (6.3 mm jack, front).
- 2 pairs of loudspeakers
Technical Data
Amplifier
- Continuous power (at distortion)
8 Ohm: 2x 40 W 4 Ohm: 2x 60 W
- Dynamic power
- 8 Ohm:
- 4 Ohm: 200 W, ± 1 dB
- Total harmonic distortion: 0.2% / 0.5% (at 1 W / nominal power)
- Attenuation factor: 25 / 12 (8/4 Ohm).
- Frequency response:
- 10 - 70,000 Hz, ± 1 dB.
Aux: 20 - 40,000 Hz, ± 1 dB
- Signal-to-noise ratio: (extraneous voltage)
- Microphone: 65 dB
- Phono MM: 70 dB
- Tape, Aux: 75 dB
- Stereo channel separation:
- Tone control:
- Bass: ± 12 dB at 70 Hz
Treble: ± 12 dB at 10 kHz
- Loudness: +10 dB (70 Hz), +8 dB (10 kHz)
- High Filter: 10 kHz (-10 dB)
- Low Filter (Subsonic):
- Mute:
Tuner
- Reception: FM, MW
- Frequencies:
- FM: 87.5 - 108 MHz
- MW: 535 - 1,605 kHz
- Frequency response:
- Input sensitivity:
- FM: 1.5 µV (IHF)
MW: 100 µV (IHF) Distortion factor:
- FM: 0.5% / 0.8% (Mono/MPX).
MW: 0.8% Signal-to-noise ratio: (noise voltage)
- FM: 60 dB
- MW: 55 dB
- Channel separation: 40 dB (FM, 1 kHz)
- Selectivity:
- Co-wave selection: 1.5 dB (FM)
- Spurious wave selection:
- Image frequency attenuation:
- FM: 80 dB (98 MHz)
MW: 70 dB (1 kHz) IF attenuation:
- FM: 100 dB (98 MHz)
- MW: 70 dB (1 kHz)
- AM suppression: 45 dB
Special Features
- Nikko Space Design
Remarks[edit]
- Other models in the same series:
- Nikko STA-301
- Nikko STA-501 S
- Nikko STA-701
- Nikko STA-1101
- Nikko STA-6010
- Nikko STA-8010
- Nikko STA-9010
Pictures[edit]
- Image: Nikko STA-1101
- Extract from brochure: Nikko STA-1101
