Myro Heaven's Gate
Description[edit]
Very large loudspeaker with modular housing for sound reinforcement in event and stage technology. It contains an array of three air motion transformers ESS Heil AMT 1 for the tweeter, whose different control (1.5 ways) results in a slightly downward radiation. As a stage loudspeaker is usually positioned above the audience, a correct sound distribution to the audience is achieved. The mid and low frequency range are driven by a 2.5 way concept by adding further drivers in the low frequency range. The cabinet consists of five cabinet modules and can be disassembled for transport. The individual components are:
- base with integrated crossover network
- low bass module
- lower bass / midrange module
- tweeter module
- upper bass/bass/midrange module
- 2 stainless steel side panels
- 4 rear panels
The Heaven's Gate was disassembled again in 2018 to use individual parts in other speakers.
Concept
- Type: floorstanding loudspeaker
- way: 1.5 + 2.5
cabinet: closed
- Dimensions (H x W x D): 259 cm x 45 cm x 89 cm
weight: 250 kg / piece new price: 84000 Euro
Equipment[edit]
- Tweeter: 3 x ESS Heil AMT 1
- Midrange: 2 x Seas Excel W18 EX001
- Low frequency: 4 x Eton 12-680/62 Hex
- interior cabling: van den Hul
minimum listening distance: 4 - 5 m
Technical description
Crossover[edit]
The crossover components in series to the drivers are of the following types:
tweeter: Mundorf Mox resistors / Intertechnik Audyn Plus capacitor
tweeter with band pass filter: additional Intertechnik Tri Therm coil
midrange driver: Intertechnik Tri Therm coil / Audyn Plus capacitor + Mundorf M-Cap capacitors
Bass driver: Mundorf L300 air core coil
bass driver: additional Mundorf T130
Pictures[edit]
- Myro Heaven's Gate.jpg
Myro Heaven's Gate
- Stage1.jpg
- Heavens Gate wine market2004 600x720.jpg
Celler wine market 2004
The modules
<zurück: Myro Lautsprecher>
<zurück: Myro>