Nikko 8085
Data
General
- Manufacturer: Nikko
- Model: 8085
- Type: Receiver
- Years of manufacture: 1976 - 1979
- Made in: Japan
- Color: silver or black
- Remote control: no
- Power consumption: 530 W max.
- Dimensions: 480 x 163 x 410 mm (WxHxD)
- Weight: 12.1 kg
- Original price approx.: 1'398 DM
Connections
- Number of inputs:
- Phono: 2.5 mV, 50 kOhm
- Microphone: 2.5 mV, 50 kOhm
- Aux: 180 mV, 100 kOhm
- Tape Play 1, 2: 180 mV, 100 kOhm
- Main In: 1300 mV, 100 kOhm
FM antenna: 300 Ohm / 75 Ohm
- MW antenna: 300 Ohm
- Number of outputs:
- Tape Rec 1, 2: 170 mV
- Tape Rec DIN: 30 mV
- 4-Channel Out: 170 mV
- Pre Out: 1,3 V
- Headphones: 200 Ohm (6,3mm jack, front)
- 2 pairs of speakers: (4-16 Ohm)
Technical Data
Amplifier
- Continuous power (at distortion):
- 8 Ohm: 2x 45 W RMS
4 Ohm: 2x 60 W
- Dynamic power:
- 8 Ohm:
- 4 Ohm:
- Total harmonic distortion: 0.3 %
- Attenuation factor: > 40
- Frequency response: 20 Hz - 20 kHz
- Signal-to-noise ratio:
- Phono MM: 70 dB
- Microphone: 75 dB
- High level: 90 dB
- Tone control:
- Bass: yes, ± 10 dB at 70 Hz
treble: yes, ± 10 dB at 10 kHz
- Loudness: yes, + 10 dB at 70 Hz, + 5 dB at 10 kHz
- High Filter: - 3 dB at 5 kHz (- 6 dB / octave)
- Low Filter (Subsonic): - 3 dB at 100 Hz (- 6 dB / octave)
Tuner
- Reception: FM, MW
- Frequencies:
- FM: 87 - 108 MHz
MW: 525 - 1'605 kHz
- Frequency response: 30 - 15'000 Hz, ± 0,5 dB
- VHF: 1.8 µV
- MW: 150 µV
- Distortion factor:
- FM: 0.2 % /0.5 % (mono/stereo)
Signal-to-noise ratio: 70 dB / 66 dB (mono/stereo)
- Channel separation:
- FM: > 40 dB
- Selectivity:
- FM: > 70 dB
MW: 30 dB
- Common wave selection:
- FM: 1.8 dB
- Spurious wave selection:
- FM:
- Mirror frequency attenuation:
- FM: 80 dB
- MW: 50 dB
IF attenuation:
- VHF: 90 dB
- MW: 50 dB
- AM suppression: 60 dB
Special Features
- Tape Dubbing
- Sound filter Linear
- Microphone input with 6,3mm jack, front
- FM muting
Comments
- Other models in the same series:
- Nikko 3035
- Nikko 5055
- Nikko 6065
- Nikko 7075
- Nikko 8085
- Nikko 9095
Pictures
- Image: Nikko 8085