Sony DTC-2000 Es
Revision as of 11:52, 29 July 2018 by 2003:c1:70a:1ac4:216f:7c27:7bad:270 (talk)
Short description
Space for a few introductory sentences about the device.
Data
General
- Manufacturer: Sony
- Model: DTC-2000 ES
- Years of manufacture: 1993-?
- Made in: Japan
- Color:champagne, black
- Dimensions: 470 x 135 x 380 mm (W x H x D)
- Weight: 12,5 kg
- Original price : 3.900.- DM (RRP)
Connections
- Number of inputs: 4
- Line In Cinch: 47 kOhm
- Digital In Cinch: 75 Ohm
- Digital In Opto 2x
- Number of outputs: 3
- Line Out Cinch: 470 Ohm
- Digital Out Cinch: 75 Ohm
- Headphones: 220 Ohm
Technical Data
- Sampling Frequency:
- 48 kHz
- 44.1 kHz
- 32 kHz
- Tape speed:
- Standard: 8.15 mm/s
- Longplay: 4.075 mm/s
- D/A converter: 1-bit D/A converter
- Frequency Response:
- Standard: 2 - 22000 Hz
- Longplay: 2 - 14500 Hz
- Dynamic range: over 94 dB
Signal to Noise Ratio: over 94 dB
- Distortion factor:
- Standard: Less than 0.0045%
- Longplay: Under 0.08
Special Features
- Digital-to-digital dubbing capability via one generation
- Automatic recording of recording date and time
- Three sampling frequencies selectable
- 48 kHz: For standard analog and digital input signals.
- 44.1 kHz: For CDs and recorded DAT tapes
- 32 kHz: For analog longplay input signals
- Longplay operation: up to four hours recording time with max. 120min tapes (recommendation)
- Visible tape run
- Various subcodes recordable:
- Start codes
- Program number codes
- Jump codes
- absolute time codes
- Digital on/off
- Subsequent change of sub-codes
- Excellent sound quality
- 1-bit A/D converter: For converting the analog input signals
- D/A pulse converter: For excellent playback quality
Remarks
- German version only with 2 head (no rear band control, no monitor switch in the right front area) and 4 D/D motor mechanics system,
- US/other area with 4 head and therefore rear band control (monitor switch in the right front area and 4 D/D motor mechanics system).