Sansui 5050/590

Data

General

• Manufacturer: Sansui
• Model: 5050 / 590
• Years of manufacture: 1977 - 1979
• Made in: Japan
• Color: silver, black
• Remote control: no
• Power consumption:
• Dimensions: 462 x 146 x 299 mm (WxHxD).
• Weight: 10.1 kg
• Original price approx.: 1'198 DM

Connections

• Number of inputs:
  • 1x Phono (Cinch)

1x Aux (Cinch)

• • 2x Tape In (1x Cinch, 1x DIN)
  • Dolby NR/4-Ch Adaptor In (Cinch)
  • Antenna FM (75/300 Ohm), AM
  • Microphone
• Number of outputs:
  • 2x Tape Out (1x Cinch, 1x DIN).
  • Dolby NR/4-Ch Adaptor Out (Cinch)
  • Headphones (6.3 mm jack, front)
  • 2 loudspeaker parre

Technical Data

Amplifier

• Continuous power (at distortion)
  • 8 Ohm: 2x 30 W (RMS, 20-20,000 Hz)
  • 4 Ohm: 2x 35 W (sine, 1 kHz)
• Dynamic power
  • 8 Ohm:
  • 4 Ohm:
• Total harmonic distortion: 0.5%
• Attenuation factor:
• Frequency Response: 15 - 40,000 Hz (IHF).
• Signal-to-noise ratio:
  • Aux: 80 dB (IHF)
• Stereo Channel Separation:
• Tone control:
  • Bass: yes

Treble: yes

• Loudness: yes
• High Filter: yes
• Low Filter (Subsonic): no
• Mute: no
• Direct/Line-Straight: no

Tuner

• Reception: FM, MW
• Frequencies:
  • FM: 88 - 108 MHz
  • MW: 535 - 1,605 kHz
• Input sensitivity:
  • FM: 2.0µV
  • MW: 30µV
• Frequency response: 30 - 15,000 Hz (+0.3 dB, -1 dB)
• Distortion factor:
  • FM, 1 kHz: < 0.4% (mono), < 0.5% (stereo).
• Signal-to-noise ratio:
  • FM: 72 dB (mono), 67 dB (stereo)

MW: 55 dB

• Channel separation: 50 dB (1kHz)
• selectivity: 80 dB
• Co-wave selection: 1.0 dB
• Spurious wave selection:
  • FM: 80 dB

MW: 35 dB

• Image frequency attenuation:
  • FM: 85 dB
  • MW: 65 dB
• IF attenuation:
  • FM: 100 dB
  • MW: 85 dB
• AM suppression: 55 dB

Special Features

• microphone mixer
• Wooden housing (foiled)

Remarks

• Other models in the same series:
• Sansui 5050/590
• Sansui 6060/690
• Sansui 7070/790
• Sansui 8080/890
• Sansui 9090/990

Pictures

• Image: Sansui 5050

• Excerpt from brochure: Sansui Receiver 5050/6060/7070/8080DB/9090DB