Myro Amur C

Revision as of 08:30, 31 May 2018 by 109.41.67.91 (talk) (Zusatzinformationen)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)

Description[edit]

Model with pentagonal cabinet to avoid standing waves inside. Since this geometry is acoustically very advantageous over right angles, it was also used earlier in the Myro Concert Monitor. The drivers are from the Accuton Cell series; the tweeter is Ceramic, hence the "C" designation.
Finishes: Bamboo Natural, Bamboo Caramel, Bamboo Black. Lacquer finishes in high gloss or silk matt in the colour of your choice. Chassis colour: white or grey

Concept

  • Type: Floorstanding loudspeaker
  • ways: 3

cabinet: closed

  • Dimensions (H x W x D): 118,4 cm x 40,5 cm x depth: 38,5 cm

Original price: 18800 Euro

Equipment
tweeter: Accuton Cell C25-6-158


Lower cut-off frequencies:
f (-0 dB) = 47 Hz
f (-3 dB) = 35 Hz
f (-6 dB) = 28 Hz

Crossover[edit]

75 components are used in the entire crossover. Each loudspeaker is calibrated and thus receives its optimally tailored component values. The time required is considerable. The result is a "time-coherent sound transducer". Special effort is made to keep the interference with the signal as precise and as low as possible. For example, the sum of all four coils in front of the midrange driver is less than 0.18 mH with a total resistance of 0.17 ohms. The values used are custom made and all smaller than the smallest value available as standard in Mundorf's range of foil coils. The circuit of the midrange driver consists of twelve individual sections.

Cabinet[edit]

The cabinet is ingeniously simple. The chamfers on the edges, together with the 108 degree internal angle of the sides, give almost the same characteristics as a very large rounded radius. Previous tests have shown that a radius of 10 cm gives excellent results. )nnen there are no parallel side surfaces. In addition, very effective foams are used for reflection insulation. An additional insulation measure counteracts standing waves in the inner height.
The cabinet walls consist of a sandwich construction with 32 mm wall thickness plus approx. 1 mm paint thickness.

Pictures[edit]

Additional information[edit]

product-description

<zurück: Myro Amur Serie>
<zurück: Myro Lautsprecher>
<zurück: Myro>