Kenwood KR-5010

Data

General

• Manufacturer: Kenwood
• Model: KR-5010
• Year of manufacture: 1979 - 1980
• Made in: Japan
• Color: Silver
• Remote control: no
• Power consumption:
• Dimensions: 471 x 139 x 358 mm (WxHxD).
• Weight: 8.6 kg
• Original price approx.: 798 DM

Connections

• Number of inputs:
  • Phono MM: 2.5 mV
  • AUX: 150 mV
  • Tape Play 1, 2: 150 mV
  • Tape Play DIN: 150 mV
  • Antenna FM (75/300 Ohm), AM
• Number of outputs:
  • Tape Rec 1, 2: 150 mV

Tape Rec DIN: 30 mV

• • Headphones (6.3 mm jack, front)
  • 2 pairs of loudspeakers

Technical Data

Amplifier

• Continuous power
  • 8 Ohm: 2x 45 W (20 Hz - 20'000 Hz)

4 Ohm: 2x 52 W

• Dynamic Power Output
  • 8 Ohm:
  • 4 Ohm:
• Total harmonic distortion: 0.03 %
• Attenuation factor: 28 at 8 Ohm
• Frequency Response:
  • Preamplifier:
  • Power bandwidth:
• Signal-to-noise ratio:
  • Phono MM: 82 dB
  • AUX, Tape: 105 dB
• Stereo channel separation:
• Tone control:
  • Bass: ± 10 dB at 100 Hz

Treble: ± 12 dB at 10 kHz

• Loudness: yes
• High Filter:
• Subsonic Filter:
• Mute: FM Muting

Tuner

• Reception: FM, MW
• Frequencies:
  • FM: 87.5 - 108 MHz

MW: 525 - 1605 kHz

• Frequency response: 20 - 15,000 Hz (+0/-1.5 dB, FM)
• Input sensitivity:
  • FM: 1.7 µV (IHF)

MW: 10 µV Distortion factor:

• • FM: 0.15% (mono), 0.2% (stereo).
• Signal-to-noise ratio:
  • FM: 75 dB (mono), 70 dB (stereo)

MW: 50 dB

• Channel separation:
  • FM: 45 dB (at 1 kHz)
• Selectivity: (IHF)

FM: 83 dB

• • MW: 35 dB
• Equal wave selection:
  • FM: 1.5 dB
• Spurious wave selection:
  • FM: 115 dB
• Image frequency attenuation:
  • FM: 100 dB
  • MW: 70 dB
• IF attenuation:
  • FM: 115 dB
• AM suppression: 60 dB

Special Features

• IF band switching Wide / Narrow

Remarks

• Other models in the same series:
  • Kenwood KR-2010
  • Kenwood KR-3010
  • Kenwood KR-4010
  • Kenwood KR-5010
  • Kenwood KR-7050 / 7750
  • Kenwood KR-8050 / 8850
  • Kenwood KR-9050

Pictures

• Picture: Kenwood KR-5010

1500px

Reviews

• Review by "Good Old Hifi": [[1]]