T+A Pulsar PA 1230 R
Template:Not template compliant Template:Needs work
Data
Preamplifier
Frequency response + 0 - 3 dB
0.5 Hz - 400 kHz
Extraneous/noise voltage spacing
High level
7 x 104 / 109 dB
Phono MM
82 / 86 dB (special version)
MC
78 / 82 dB (special version)
Subsonic filter
fixed (special version)
Distortion factor
< 0,001 %
Intermodulation
< 0,001 %
Kanaltrennung
>90 dB
Input sensitivity nominal
High level
250 mV / 20 kOhm
MM
1 - 5 mV
16 Capacities
MC
60 - 1000 uV
16 Capacities
Outputs
Headphones
50 Ohm
2 x Tape
250 mV / 100 Ohm
PRE out Cinch nominal
1 V rms
maximum
9.5 V rms
Impedance
22 Ohm
Decoder interface with fixed level (TASI)
available
Power amplifier
Rated power per channel at 8 Ohm
100 Watt
both channels simultaneously into 4 Ohm
150 Watt
Impulse power into 8 Ohm
150 Watt
into 4 Ohm
290 watts
Power bandwidth
1 Hz - 300 kHz
Frequency response + 0 - 3 dB
1 Hz - 400 kHz
Slew rate
60 V/us
Damping factor
> 500
Noise voltage distance
> 110 dB
Distortion factor
< 0,002 %
Sieving
50000 uF
Mains connection 110 V or 220 / 240 V, 50 Hz
300 VA
Dimensions
7,5 x 44 x 39 cm
Weight
9 kg
Colours
Black (9005), aluminium silver, chrome (special version)
Remote control
(special equipment)
Phonomodule replaces one HP input
Remarks
Other models in the same series: