Tascam DA-30 MK II

Daten

Allgemein

Technische Daten

Tape Speed: 8.5 mm/sec, (12.225 mm/sec.)
Quantization Bit: 16-bit linear (SP); 12 bit nonlinear (LP)
Sampling Rate: Recording: 48 kHz/ 44.1 (digital, analog input); 32 kHz (digital input only)
Frequency Response: 20- 20.000 Hz +/- 5 dB 9 SP) 20- 14.500 Hz +/- .5 dB (LP)
Signal to Noise Ratio: Better than 92 db
Dynamic Range: Better than 93 db
Total Harmonic Distortion: 0.004 % at 1 kHz (SP) .07 % at 1 kHz (LP)
Channel Separation: Better than 85 db (at 1 kHz)
Wow and Flutter: Unmeasurable (less than 0.001 %)
Analog Input: (XLR) balanced, +4 dBm / 10k ohm (RCA) unbalanced, -10 dB V /50k ohm
Analog Output: (XLR) balanced, +4 dBm/10 kOhm, (RCA) unbalanced, -10 dBV (+6 dBV max)/ 430 Ohm;
Output Level: 100 mW or more (8- Ohm load)
Headphone Output: 1/4" phone jack (x1), 100 mW + 100 mW (8 ohm)
Digital I/O:
(XLR) AES/EBU (RCA) Coaxial (S/PDIF); Parallel Control I/O Port: D-sub
15-pin (female)
Independent left and right channel
AES/EBU and S/ PDIF Digital I/O
Balanced and unbalanced I/O
48/ 44.1/ 32 kHz sampling frequencies
SCMS free recording
Built-in parallel interface

Besondere Ausstattungen