Kenwood L-03 A

Year - 1983, 180.000yen Rated output (both ch operation) 150W (8Ohm, 20 Hz to 20 kHz)

                                        200W  (4Ohm, of 1 kHz, THD 0.003)

Dynamic Power 230W (8Ohm)

               340W (4Ohm)

Total harmonic distortion (20Hz~20kHz) Tuner, Aux, Tape → SP terminal:

Phono ￫ SP terminal: 0.003% (at the time of the rated output, 8Ω) 0.003% (at the time of 1/2 rated output, 8Ω) 0.004% (at the rated output, 8Ω) Intermodulation distortion (60Hz: 7kHz = 4: 1) Tuner, Aux, Tape → SP terminal: 0.003% (at the time of the rated output, 8Ω) Frequency characteristic DC~200kHz -3dB (Tuner, Aux, Tape → SP terminal) SN ratio (IHF-A, at the rated output, SP terminal) MM Phono: 88DB

                                                       Phono MC: 71DB 

Tuner, Aux, Tpae: 110DB Subsonic Filter 18Hz, 6dB / oct Loudness control (Vol-40dB) 30Hz, 60Hz, 90Hz: + 3dB / + 6dB / + 9dB Damping factor (55Hz, 8Ω) 2,000 Rise time 1.7μs (Tuner, Aux, Tape → SP terminal) Slew rate ± 100V / μs (Tuner, Aux, Tape → SP terminal) Input sensitivity / impedance (at the rated output, SP terminal) MM Phono: 2.5MV / 47Kohm Phono MC: 0.1MV / 100Ohm Tuner, Aux, Tape: 150MV / 47Kohm Main In: 1V / 100Kohm <Equalizer amplifier Phono → Tape rec> Phono maximum permissible input (1 kHz, distortion 0.003%) MM: 260MV MC: 10 mV Phono RIAA deviation 20Hz~20kHz ± 0.2dB <Others> Output level / impedance Rec Tape (pin): 150 mV / 220 ohm Pre out (maximum output): 1V / 750Ω Dimensions Width 440 × height 158 ​​× depth 383mm weight 15kg