Onkyo TX-4000
Data
Onkyo Stereo Receiver TX-4000
General:
- Manufacturer: Onkyo
- Model: TX-4000
- Years of manufacture: 1980
- Manufactured in:
- Color:
- Remote control:
- Power Consumption:
- Dimensions: 48.0 x 13.0 x 37.6 cm (HxHxD).
- Weight: 11,4 kg
- New price approx:
Connections:
- Number of inputs:
- Phono
- Phono ground connection
- CD
- Tape
- Coaxial FM- antenna connection (75 Ohm)
- AM- Antenna connection
- Number of outputs:
- 2 pairs of loudspeakers
- Headphone output 6.3 mm jack plug
Technical data:
Amplifier:
- Continuous power (at distortion)
- 8 Ohm: 2 x 45 Watt, 20-20 khz, (0.04 %)
- Total harmonic distortion: 0.04 %
- Damping factor: 40 at 8 ohm
- Frequency response: 20 - 30,000 Hz ± 1 dB
- Signal-to-noise ratio:
- Phono: 76 dB
Tape: 80 dB
- Stereo channel separation:
- Tone control:
- Bass: ± 12 dB (100 Hz)
- Treble: ± 12 dB (10 khz)
- Loudness: yes
- High Filter: yes
- Low Filter (Subsonic):
- Mute:
- Direct/Line-Straight:
Tuner:
- Reception: FM, AM
- Frequencies:
- FM : 87.9 - 107.9 Mhz
- MW : 530 - 1,620 khz
- Frequency response FM: 30 - 15,000 Hz
- Input sensitivity:
- Distortion factor: mono 0.15 %, stereo 0.25 %.
- Signal-to-noise ratio:
- FM: mono 70 dB, stereo 65 dB
AM: 40 dB
- Channel separation: 40 dB (1 khz)
- Selectivity:
- Co-wave selection:
- Spurious wave selection:
- IF attenuation:
- IF attenuation:
- AM suppression:
- Output level:
- RDS: no
- Station memory:
Comments
Other models in the same series:
Pictures