Mitsubishi DA-R 440
Data
General
- Manufacturer: Mitsubishi
- Model: DA-R440
- Year of manufacture: around 1980 - 1981
- Made in: Japan
- Color: silver
- Remote control: no
- Power consumption: 190 W
- Dimensions: 424 x 105 x 317 mm (WxHxD)
- Weight: 6,3 kg
- Original price approx.: 498,-DM
Connections
- Number of inputs:
- Phono: 3.0 mV / 47 kOhm
Aux: 200 mV / 47 kOhm
- Tape 1: 200 mV / 47 kOhm
- Tape 2: 200 mV / 47 kOhm
- Antenna FM (75/300 Ohm), AM
- Number of outputs:
- Tape 1: 250 mV
Tape 2: 250 mV
- Headphones (6.3 mm jack, front)
- 2 pairs of loudspeakers
Technical Data
Amplifier
- Continuous power
8 Ohm: 2x 20 W 4 Ohm: 2x 33 W
- dynamic power
- 8 Ohm:
- 4 Ohm:
- Total harmonic distortion: 0.05%
- Attenuation factor:
- Frequency response:
- Phono: MM systems only
- Aux:
- Signal-to-noise ratio:
- Phono:
- Aux:
- Stereo Channel Separation:
- Tone control:
- Bass: 100 Hz, ±10 dB
Treble: 10 kHz, ±10 dB
- Loudness: yes, 100 Hz (plus 7 dB), 10 kHz (plus 5 dB)
- High Filter: no
- Low Filter (Subsonic): no
- Mute: FM Muting
- Direct/Line-Straight: no
Tuner
- Reception: FM, MW
- Frequencies:
- FM:
- MW:
- Frequency response:
- FM:
- Input sensitivity:
- VHF: 16 µV (75 Ohm)at stereo
MW: 600 µV Distortion factor:
- FM: 0.3% (stereo)
Signal-to-noise ratio:
- FM: 69 dB (stereo), 75 dB (IHF-A).
- Channel separation:
- FM: 50 dB
- Selectivity:
- FM: 55 dB
- MW: 30 dB
- Equal wave selection:
- FM:
- Spurious wave selection:
- IF attenuation:
- FM:
- IF attenuation:
- VHF:
- AM suppression:
- RDS: no
- Station memory: yes, 7 mechanical and illuminated buttons
Special Features
- Signal strength of the station to be tuned in is displayed via the left-hand pointer instrument, input Tape 2 has both cinch sockets and a DIN input (diode socket), two cold appliance sockets.
Pictures
