Sansui AU-D 33

Sansui-Mittelklassemodell der frühen 80er Jahre (1981-84). Stellt zweimal 50 Watt Ausgangsleistung an 8 Ohm bereit. Dank Sansuis Super Feedforward System wenige Verzerrungen. Eingangsquelle per Drück-Schalter auszuwählen, LEDs zeigen die jeweils aktive Eingangsquelle an. In Großbritannien häufig im Set mit KEF Coda III-Lautsprechern verkauft.

AU-D33 was one of the best amplifier from Sansui and from the market in that period.

Power output MIN,RMSboth channels driven,from 20 to 20,000Hz with no more than 0.004% total harmonic distorton 50watts per channel into 8 ohms Load impedance...4-8ohms Total harmonic distortion .......less than 0.004% at below rated min.RMS power output Intermodulation distortion (60 Hz"7Khz .4.1 SMPTE method)......less than 0.006^ at rated Frecvency response(at 1 watt) Overall(from AUX).......DC to 300.000 Hz+0dB,-3.0dB RIIA curve deviation (PHONO-MM,20 to 100Khz)......................................................+0.2dB,-0.5dB(REC OUT) Damping factor(1Khz,both channel driven)..........................40into 8ohm Input senzitivity and impedance (at 1 Khz) PHONO-MC....250microV/100 ohms (Max.input capability 170mV at 1 kHz less than 0.01 total harmonic distortion( AUX,TUNER,TAPE PLAY-1,2 ........200Mv/47 kilohms Output level(1,000) TAPE REC-1,2...200mV into 47 Kohm Channel separation(1kHz,at rated power output) PHONO-MM....60 dB AUX,TUNER,TAPE PLAY-1,2 ............90 dB Controls BASS....+/-10dB at 50 Hz TREBLE....+/-10 dB at 10 kHz LOUDNESS.....+8dB at 100 Hz...+5dB at 10 kHz Die Maße des Sansui AU-D 33 liegen bei 430 x 112 x 334 mm, das Gewicht bei 7,3 kg.

[Bild:]