Kenwood KA-3002
Data
General
- Manufacturer: Kenwood
- Model: KA-3002
- Years of manufacture: 1971 - 1973
- Made in: Japan
- Color: Silver, wood side panels
- Type: Amplifier
- Power consumption: 105 W at full output, 15 W without signal
- Dimensions (WxHxD): 408 x 134 x 280 mm
- Weight: 8 Kg
- Original price approx.: 700 DM
Connections
- Number of inputs:
- Input sensitivity:
- Phono 1 MM: 2.5mV, switchable 30 kOhm, 80 kOhm.
- Phono 2 MM: 2.5mV, 50 kOhm, switchable 0.06mV, 200 Ohm
- Microphone: 2.5mV, 50 kOhm
- Tuner: 200mV, 100 kOhm
- AUX 1,2: 200mV, 100 kOhm
- Tape Play A, B: 200mV, 100 kOhm
- Main In: 1 V, 50 kOhm
- Number of Outputs:
- Outputs:
- Tape Rec A, B: 200mV
- DIN: 40mV
- Dubbing: 200 mV
- Pre-Out:
- Headphones:
- Connectors for 2 pairs of speakers
Technical Data
- Continuous power (at THD)
- 8 Ohm: 2x20 W (RMS, 20Hz...20Khz, 0.08% THD), 2x 30W (8 Ohm, 1Khz)
- 4 Ohm:
- dynamic power
- 8 Ohm: 80 W IHF
- 4 Ohm: 100 W IHF
- Total harmonic distortion: 0.5% THD at rated power from 20 - 20,000 Hz
- Attenuation factor: 45 at 8 Ohm
- Frequency response: 18 - 30,000 Hz
- Signal-to-noise ratio:
- Phono 1,2: 65dB (MM).
- Phono 2, 0.06mV: 45 dB
- Microphone: 67 dB
- Tuner: 77dB
- Phono 1,2: 65dB (MM).
AUX: 77dB
- Tape Play: 77dB
- Tone control
- Bass: ± 10 dB at 100Hz
Treble: ± 10 dB at 10Khz
- Loudness: + 8 dB at 100 Hz, + 3 dB at 10 kHz
- High Filter: +12dB/oct. at 7kHz
- Low Filter: +12dB/oct. at 80Hz
Muting: 0 dB, - 20 dB
Special Features
- Pre- and power amplifier separable
- Mono / Stereo switch
- 4-channel switch
- Linear switch
- Mono center channel output
Comments
- Other models in the same series:
- Previous model:
- Kenwood KA-2600:
- Successor model:
- Corresponding tuners
- Kenwood recommended:
- Kenwood KF-6011 denoiser
- Kenwood KF-8011 Denoiser
Pictures
- Image: Trio KA-3002