Kenwood KA-5090 R
Data
General
- Manufacturer: Kenwood
- Model: KA-5090 R
- Type: Integrated amplifier
- Years of manufacture: 1997 - 2000
- Made in: Japan
- Colors: Silver, Black
- Remote control: yes
- Power consumption: 300 watts (at full output)
- Dimensions: 440 x 147 x 392 mm
- Weight: 10 kg
- Original price approx.: 699 DM
Connections
- Number of inputs:
- Input sensitivity:
- Phono 1, 2 MM: 2.5mV, 33 kOhm, 47 kOhm, 100 kOhm switchable.
- Phono 1, 2 MC: 0.2mV, 100 Ohm
Tuner: 150mV, 47 kOhm
- AUX: 150mV, 47 kOhm
- Tape Play A, B: 150mV, 47 kOhm
- Tape DIN:
- Number of outputs:
- Outputs:
- Tape Rec:
- Tape DIN:
- Headphones
- 2 pairs of speakers
Specifications
- Discrete power stage with 4 TRAITR transistors
- Sound loss free input selection via relay
- Highly stable full metal housing
- Integrated switchable phono preamplifier for magnet and moving coil systems
- Motor-driven volume control
- Concealed control panel
- REC-OUT selector switch
- "Source Direct" function
- Main Power and Stand-By Switches
- Speaker selector switch A + B
- Remote control
- 6 Audio Inputs
- Sturdy screw terminals for loudspeakers
- 3 power sockets (1 x non-switched / 2 x switched)
- Signal Grond Line grounding
- Logical flow design
- Loudness function
- Gold-plated input sockets
- Rated power: 100 W + 100 W
- Total harmonic distortion: 0.04%
- Frequency response: 5Hz - 100kHz
- Attenuation factor: 250
- Signal-to-noise ratio: 105 dB
Special Features
- TRAITR technology: TRAITR = Thermally Reactive Advanced Instantaneour Transistor
- IR system remote control
Remarks
- Other models in the same series:
- Kenwood KAF-1010
- Kenwood KAF-3010 R
- Kenwood KA-5090 R
- Kenwood KA-7090 R
Pictures
- Picture: Kenwood KA-5090 R
Reviews
- Somewhat lower-powered variant of the Kenwood KA-7090 R
- Because only one FET operates per channel, rather than two as in the 7090R (both with tolerances that are not always the same), it can do everything slightly better than the 7090 R in terms of airiness, lightness and impulse because of the same power supply at a lower output power, but has slightly higher distortion (at a level no one hears anyway).
- Uses TRAITR (Thermally Reactive Advanced Instantaneous Transistor).
- Provides 3 sockets on the rear panel, one of which is unswitched.