T+A Pulsar R 2000 AC

Data

General

• Manufacturer: T+A
• Model: R 2000 AC
• Years of manufacture:89-94
• Made in:Germany
• Colour: Black/Grey
• Remote control: Yes
• Power consumption:
• Dimensions: 15x44x39x17.5
• Weight: 17,5 kg
• Original price approx.: 4998.-DM

Connections

• Number of inputs:

2x RCA in 3x RCA in/out (tape loops) 1x MM 1x MC 2x FM antenna 1x AM antenna

• Number of outputs:

3x RCA out (Tape) 1x XLR preout 2 pairs of speaker connectors A/B (also for banana plugs)

Technical data

END STAGE

• Continuous power (at distortion).

8 Ohm: 120 W 4 Ohm: 190 W

• • 2 Ohm: 250 W
• Dynamic power
  • 8 Ohm: 200 W
  • 4 Ohm: 280 W
  • 2 Ohm: 270 W
• Total harmonic distortion: 0,004%
• Attenuation factor: >400
• Frequency response: +0 -3 db 4-300 KHZ

PREFERENCES

• Signal to noise ratio: High level 104db
• Frequency response : +0 -3db 3-350KHz
• Distortion factor: 0,003%
• Stereo channel separation:
• Tone control:
  • Bass: Yes
  • Treble: Yes
• Loudness: Yes
• Flat : Yes
• High Filter:
• Low Filter (Subsonic):
• Mute:
• Direct/Line-Straight:

RECEIVE STAGE

• Receive: Two 75Ohm inputs for cable and house connection.
• Frequencies:
  • FM: 87.5 MHz - 108 MHz
  • MW: 522 kHz - 1611 kHz
• Frequency response: +-1,5db 10Hz - 15Khz

Input sensitivity: At 75Ohm mono 0,9µV , stereo 33,0µV Distortion factor: Mono/Stereo 0,1/0,2%

• Signal to noise ratio: >76/74db
• Channel separation:
• Selectivity: 70db
• Co-wave selection:
• Spurious wave selection:
• IF attenuation:
• IF attenuation:
• AM suppression:
• Output level:
• RDS: yes
• Station memory: 100

Special Features

• AudioCon system

Remarks

Other models of the same series:

Pictures