Denon DRA-300

Revision as of 10:00, 5 October 2019 by Hapeg2 (talk | contribs)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)

Data

General:

  • Manufacturer: Denon
  • Model: DRA-300

Type: Receiver

  • Years of manufacture: 1982 -1984
  • Manufactured in: Japan
  • Color: Silver
  • Remote control:
  • Power consumption: 110 W
  • Dimensions: 434 x 112 x 408 mm (WxHxD)
  • Weight: 7.6 kg
  • Original price approx.: 750 DM


Connections:

  • Number of inputs:
    • PHONO MM 2,5 mV 47 kOhm
    • TAPE,
    • DAD,
    • AUX 150 mV 33 kOhm
  • Number of outputs:
    • 2 speaker pairs


Technical Data

Amplifier:

  • Continuous power (at distortion)
    • 8 Ohm: 2 x 33 Watt (20- 20 kHz, distortion 0,05 %)
    • 4 Ohm:
  • Dynamic power
    • 8 Ohm:
    • 4 Ohm:
  • Total harmonic distortion: 0.05 % (at rated power into 8 ohms).
  • Attenuation factor:
  • Frequency response: 5~ 40 kHz (0.1% distortion, both channels driven at 8 ohms).
  • Signal-to-noise ratio:
    • PHONO MM: 80 dB at 5.0 mV input.
    • TAPE, DAD, AUX: 93 dB
  • Stereo channel separation:
  • Tone controls:
  • Bass +- 8 dB at 100 Hz
  • Treble +- 8 dB at 10 kHz
  • Loudness: + 8 dB at 100 Hz; + 4 dB at 10 kHz
  • High Filter:
  • Low Filter (Subsonic):
  • Mute:
  • Direct/Line-Straight:


Tuner:

  • Reception: FM, MW
  • Frequencies:
    • FM: 87.5 - 108 MHz
    • MW: 522 - 1611 KHz
  • Sensitivity:
    • VHF: 2.8 µV (14.2 dBf)
    • MW: 15 µV
  • External voltage separation: STEREO 67 dB
  • stereo separation: 46 dB
  • STEREO: 0.5 % (WIDE)
  • Frequency response: 10 Hz ... 15 kHz
  • Signal to noise ratio: 55 dB
  • Station memory: 5


Comments


Pictures

  • Image: Denon DRA-300

DRA-300.jpg


Reports

Links