Teac A-3340

Data

General

Connections

Number of inputs:
- Microphone: 0.25 mV / -72dB / 600 Ohm - 10 kOhm (6.35 mm jack).
- Line In: 100 mV / 50 kOhm (Cinch)
- Line In DIN: 30 mV / 10 kOhm
Number of outputs:
- Line Out (adjustable): 300 mV / 10 kOhm (Cinch)
- Headphones: 8 Ohm (6,35 mm jack)

Technical Data

4-channel, Quadro Tape Deck (stereo or mono with Simul Sync)
Max. Reel diameter: 26,5 cm
Drive type: 2 eddy current winding motors and 1 hysteresis synchronous sound motor
Head equipment: 1 recording head, 1 playback head, 2 erasing head Permaflux
Tracks: 4
Tape speeds: 19 cm/s, 38 cm/s
- Fine control 38cm/s & 19cm/s: ± 0,5 %
Overall frequency response:
- at 19 cm/sec: 25 - 22'000 Hz
- at 38 cm/sec: 25 - 24'000 Hz
Crosstalk attenuation at 1 kHz in stereo mode: 50 dB
Quiescent signal-to-noise ratio at full modulation:
- at 19 cm/sec: 58 dB
- at 38 cm/sec: 58 dB
Stereo channel separation: 50 dB (1Khz)
Synchronous fluctuations:
- at 19 cm/sec: ± 0.06 %
- at 38 cm/sec: ± 0.04 %
Max. Deviation of the average speed:
- at 38 cm/sec: ± 1 %.
Extinguishing damping:
- at 38 cm/sec: 68 dB
Premagnetization and extinction frequency: 100 kHz
Rewind time: 140 seconds 540 m tape

Special Features