Kenwood KR-8140

Revision as of 09:58, 30 January 2019 by Hapeg2 (talk | contribs)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)

Data

General

  • Manufacturer: Kenwood
  • Model: KR-8140
  • Type: Receiver
  • Years of manufacture: 1970 - 1973
  • Made in: Japan
  • Color: silver
  • Remote control: no
  • Power consumption: 400 W (full output), 35 W (no signal)
  • Dimensions (WxHxD): 480 x 146 x 406 mm
  • Weight: 15,1 kg
  • Original price approx:


Connections

  • Number of inputs:
    • Phono: 2.5 mV - 5 mV / 50 kOhm (max. 100 mV).
    • AUX: 200 mV / 50 kOhm
    • AUX 4-channel: 200 mV / 50 kOhm
    • Tape Play: 200 mV / 50 kOhm
    • Antenna FM (75 Ohm Unbalanced / 300 Ohm Balanced), AM.
  • Number of outputs:
    • Tape Rec: 200 mV / 50 kOhm
    • Headphones Front / Rear: 2 x 6.3 mm jack plug
    • 2 speaker pairs each front and rear


Technical Data Tuner Part

  • Reception: FM, MW
  • Frequencies:
    • FM: 88 - 108 MHz

MW: 520 - 1610 kHz

  • Frequency response: 20 - 15,000 Hz (± 1.2 dB, FM)
  • Input sensitivity:
    • FM: 1.7 µV (IHF)

MW: 20 µV Distortion factor:

    • FM: 0.5% (mono), 0.8% (stereo).
  • Signal-to-noise ratio:
    • FM: 65 dB (stereo)

MW: 50 dB

  • Channel separation:
    • FM: 40 dB (at 1 kHz)
  • Selectivity: (IHF)
    • FM: 55 dB
    • MW: 25 dB
  • Equal wave selection:
    • FM: 3.0 dB
  • Spurious wave selection:
    • FM: 45 dB
  • Image frequency attenuation:
    • FM: 60 dB
    • MW: 45 dB

IF attenuation:

    • FM: 90 dB
  • AM suppression: 60 dB
  • Fixed station memory: 5x FM


Technical Data Amplifier Part

  • Continuous power Quadro mode:
    • 8 Ohm: 4 x 26 W (1 kHz)

4 Ohm: 4 x 35 W (1 kHz)

  • Dynamic power
    • 8 Ohm:
    • 4 Ohm:
  • Continuous power stereo operation:
    • 8 Ohm:
    • 4 Ohm:
  • Dynamic power
    • 8 Ohm:
    • 4 Ohm:
  • Total harmonic distortion: 0.8% (at rated power)
  • Attenuation factor: 40 (8 Ohm)
  • Frequency response:
    • Preamplifier: 20 - 40,000 Hz ± 1 dB)
    • Power bandwidth: 18 - 30,000 Hz
  • Signal-to-noise ratio:
    • Phono: 63 dB
    • AUX, Tape: 75 dB
  • Tone control:
    • Bass: ± 12 dB at 100 Hz
    • Mids: ± 6 dB at 1 kHz

Treble: ± 12 dB at 10 kHz

  • Loudness: + 10 / + 5 dB (100 Hz / 10 kHz)
  • Low Filter (Subsonic): - 8 dB at 100 Hz
  • High Filter: - 6 dB at 10 kHz
  • Mute: FM muting
  • AFC: yes


Special Features

  • 5 FM preset buttons
  • Switch for 4-channel SQ, Matrix, Mix / AUX / Mono
  • Midrange control
  • Mono / Stereo switch
  • Level control for tape on rear panel
  • Tape Dubbing Output
  • Pre-Out Output Front, Rear


Comments



Pictures

  • Picture: Kenwood KR-8140

Kenwood KR-8140-1.jpg


  • Picture: Kenwood KR-8140 backside

Kenwood KR-8140-2.jpg


Reports

Links