Akai AM-35
Template:Nicht vorlagenkonform
Anschlüsse: 2 Paar Lsp. separat Schaltbar, Direktschaltung (subsonic), 3 x Tape (Hinterbandkontrollschaltung und Aufnahmeauswahlschalter), 3 x Hochpegel, 1 x Phono MM , Klangregler, Balanceregler, Kopfhörerausgang
Power Output: 2x90Watt an 4 Ohm ( 1Khz,1%)/ 2x60 Watt an 8Ohm(FTC,30Hz-20Khz,0,05%) Power band width: 10Hz bis 60khz/1,0% Total Harmonic distortion: 0,005& (1Khz,8Ohm) Phono max.Input Level: 160 mV Frequency response: 5Hz to 100khz (+0db, -3db) Tone Control: Bass= +/- 8db(100hz) Treble= +/- 8db(100hz) Eingangsempfindlichkeit: Phono(MM): 2,5mV/47k Ohm Tuner: 150mV/47k Ohm Output Level/Impedance Tape rec out: 150mV/1k Ohm Damping factor: 45 (1khz,8ohm) Residual noise: 0,1mV ( A Filter)
Phono (MM): 84db Tuner,etc. : 100db Channel separation: 60db ( 1khz)/50db (10khz) required speaker imedance: A or B = 4-16ohm A and B = 8-16ohm Power requirement: 220 Volt/Europa 9,6 Kg WEight
Features: - 90W+90W (DIN) output DC Power amplifier - Dual pole DC servo incorporated DC Power amplifier - Direct operation switch with built-in subsonic filter operation position - 3 Cassette deck connection capable amplifier - 2 Sets of speaker system terminals - Electronic muting and speaker protection system