Sansui 9090 DB/990 DB

Revision as of 00:30, 1 July 2018 by Hapeg2 (talk | contribs)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)

Data

General

  • Manufacturer: Sansui
  • Model: 9090 DB / 990 DB
  • Years of manufacture: 1975 - 1977
  • Made in: Japan
  • Color: silver, black, wooden cabinet
  • Remote control: no
  • Power consumption: 435 / 650 W (nominal power / max.)
  • Dimensions: 540 x 182 x 397 mm (WxHxD)
  • Weight: 23,6 kg
  • Original price approx.: 750 US-$, 2'800 DM


Connections

  • Number of inputs:
    • 2x Phono (Cinch): 2.5 mV / 50 kOhm

1x Aux (Cinch): 150 mV / 50 kOhm

    • 2x Tape In (1x Cinch, 1x Cinch/DIN): 150 mV / 50 kOhm
    • Main In (Cinch): 775 mV / 100 kOhm
    • Antenna FM (75/300 Ohm), AM
    • Microphone: 5 mV / 10 kOhm
  • Number of outputs:
    • 2x Tape Out (1x Cinch, 1x Cinch/DIN): 150 mV (Cinch) / 30 mV (DIN).

2x Pre Out (Cinch): 775 mV

    • 2x headphones (6.3 mm jack, front)
    • 3 speaker pairs


Technical Data

Amplifier

  • Continuous power (at distortion)
    • 8 Ohm: 2x 125 W (RMS, 20-20,000 Hz)
    • 4 Ohm: 2x 160 W (sine, 1 kHz)
  • Dynamic power
    • 8 Ohm: approx. 160 W
    • 4 Ohm: approx. 210 W
  • Total harmonic distortion: 0.1%
  • Attenuation factor: 30
    • Phono: 30 - 15,000 Hz (± 0.3 dB)
    • Aux: 10 - 30,000 Hz (± 1 dB)
  • Signal-to-noise ratio: (IHF)

Phono: 70 dB Aux, Tape: 80 dB

  • Stereo channel separation: 50 dB (1 kHz)
  • Tone control: Tripple Tone Control
    • Bass: ± 10 dB at 50 Hz, selectable frequency 150/300 Hz
    • Mids: ± 5 dB at 1.5 kHz

Treble: ± 10 dB at 10 kHz, selectable input frequency 1.5/3 kHz

  • Loudness: +8/+6 dB (50 Hz/10 kHz)
  • High Filter: -10 dB at 10 kHz
  • Low Filter (Subsonic): -10 dB at 50 Hz
  • Mute: -20 dB
  • Direct/Line-Straight: yes


Tuner

  • Reception: FM, MW
  • Frequencies:
    • FM: 88 - 108 MHz
    • MW: 535 - 1,605 kHz
  • Frequency response:
  • Input sensitivity:
    • FM: 0.9 / 1.7µV, (DIN/IHF).

Distortion factor:

    • FM: 0.2% / 0.3% (mono/stereo).
  • Signal-to-noise ratio:
  • Channel separation:
  • Selectivity:
  • Co-wave selection:
  • Spurious wave selection:
  • Image frequency attenuation:
  • IF attenuation:
  • AM suppression:


Special Features

  • Internal Dolby decoder
  • Separable pre/power amplifier
  • Wooden cabinet
  • 2 analog VU meters
  • 2 Phones Jack jacks 6,3"
  • 1 Mic Jack connector 6,3", adjustable
  • VU-Meter Switch (Power Level, Dolby No. Level)


Remarks


Pictures

  • Extract from brochure: Sansui 9090 DB

Sansui 9090 DB-Prospekt-1.jpg


  • Extract from brochure: Sansui Receiver 5050/6060/7070/8080DB/9090DB

Sansui 5050-6060-8080-9090-Prospekt-1.jpg Sansui 5050-6060-8080-9090-Prospekt-2.jpg


Reports

Links