Technics SU-A 2
Data
General
- Manufacturer: Technics
- Model: SU-A 2
- Type: Class A Stereo DC Preamplifier
- Note: Was only built to order in manual labor
- Years of manufacture: 1977 - 1980
- Made in: Japan
- Color: Black
- Power consumption: 240 W, without signal 130 W
- Dimensions (WxHxD): 450 x 205 x 574 mm
- Weight: approx. 38.5 kg
- Original price approx.: 1'600'000 Yen (Japan, 1977), 22'500 DM
Connections
- Number of inputs:
- Phono 1:
- MM: 2.5 mV, 500 mV max.
- Impedance selectable: 22k, 33k, 47k, 75k, 100kOhm
- Capacitance selectable: 100p, 150p, 200p, 300p, 500pF
- MM: 2.5 mV, 500 mV max.
- Phono 1:
MC: 0.1 mV, max. 20 mV
- Impedance selectable: 10, 22, 47, 100, 220 Ohm
- Phono 2:
- MM: 2.5 mV, max. 500 mV
- Impedance selectable: 22k, 33k, 47k, 75k, 100kOhm
- Capacitance selectable: 100p, 150p, 200p, 300p, 500pF
- MM: 2.5 mV, max. 500 mV
MC: 0.1 mV, max. 20 mV
- Impedance selectable: 10, 22, 47, 100, 220 Ohm
- Microphone: 2mV / 600 kOhm, max. 200 mV
- Tuner: 150mV / 47 kOhm (with level control on rear panel)
AUX: 150mV / 47 kOhm (with level control on rear panel) Tape Play 1, 2, 3: 150mV / 47 kOhm (each with level control on rear panel)
- Display instruments: External input
- Number of outputs:
- Tape Rec 1, 2, 3: 150mV / 500 Ohm
- Pre Out 1, 2: 1 V / 500 Ohm, max. 10 V
- Remote control output for power on / off of the power amp
- Headphones: Impedance 4 - 600 Ohm
Technical Data
- Frequency response:
- Phono 1, 2 MM: DC - 20 kHz, RIAA ± 0.2 dB.
- Phono 1, 2 MC: 30 Hz - 20 kHz, RIAA ± 0.2 dB
Microphones: 20 Hz - 20 kHz, + 0 -1 dB Tuner: DC - 20 kHz + 0 -0.2 dB Aux: DC - 20 kHz + 0 -0.2 dB
- Tape 1, 2, 3: DC - 20 kHz + 0 -0.2 dB
Distortion: THD (20Hz - 20kHz)
- Phono 1, 2 MM:
- 1 V: 0.003% (VR -30 dB)
- 10 V: 0.003% (VR max.)
- Phono 1, 2 MC:
- 1 V: 0.005% (VR -30 dB).
- 10 V: 0.005% (VR max.)
- Microphones:
- 1 V: 0.005% (VR -30 dB)
- 10 V: 0.005% (VR max.)
- Tuner, Aux, Tape 1, 2, 3:
- 1 V: 0.003% (VR -30 dB)
- 10 V: 0.003% (VR max.)
- Phono 1, 2 MM:
- Signal-to-noise ratio:
- Phono MM:
- 2.5 mV input voltage: 95 dB
- 10 mV input voltage: 107dB
- Phono MC:
- 0.1 mV input voltage: 80dB (-160 dBV)
- Phono MM:
- Tone control
- Bass: operating frequency 15, 60, 240, 500 Hz (selectable)
- R + L separately adjustable: ± 10 dB (Q= 0.7-7.0).
- Bass: operating frequency 15, 60, 240, 500 Hz (selectable)
Treble: Insertion frequency 1, 4, 16 kHz (selectable).
- R + L separately adjustable: ± 10 dB (Q= 0.7-7.0)
- Loudness: Variable (rotary dial behind volume control)
- High Filter: 2-stage, selectable frequency 8, 12 kHz, - 18 dB / octave
- Low Filter: 2-stage, insert frequency 15, 30Hz, selectable, - 18 dB / octave
- Low Filter (Subsonic): 30Hz, - 12 dB / octave
- Muting: -∞, Off, -20dB
- Oscillator characteristics: sine wave, square wave: 20Hz - 20kHz (variable adjustable)
- Signal tone: 20Hz - 20kHz (variable adjustable).
- Pink noise: ± 7% of the modulation factor
Special Features
- Indicators and controls Front:
- Left side:
- Display instruments with dB scale from -50 to + 10 dB and volt scale from 0.003 - 1 V.
- Features:
- Average operating time: 0.33 sec.
- Peak Display: 0.00005 sec.
- Peak Hold: max. value stored for 2 hours
- Features:
- Power switch
- Headphone outputs: Impedance 4 - 600 Ohm
- Filter knobs for: Low, High, EQ Subsonic
- Display instruments with dB scale from -50 to + 10 dB and volt scale from 0.003 - 1 V.
- Left side:
Center:
- Indicator lights: OSC, Microphones
- Input selector with indicator lights and memory function for program sources Aux, Tuner, Phono, Tape 1, 2 or 3 Rec/PB)
- Rec selector with indicator lights for Tape Dubbing (1>2-3, 2>1-3, 3>1-2), Aux, Tuner (with memory function), Phono, Off
Sound position: Rec Out, Pre Out, Off
- Mode selector for Reverse, Stereo, L+R, L, R
- Balance control
- Mode selector: DC, Low Cut 2 Hz.
Right side:
- Phono and cartridge selector: Phono 1 MC/MM, Phono 2 MC/MM
- Master volume control
- Variable Loudness control
- Loudness: On / Off
- Muting: -∞, Off, -20dB
- Indicators and controls behind the front panel:
- Left side:
- Headphone Level Switch
- Pre Out Connectors
- Display range instruments with attenuator: -10 dB to -20 dB
- Input selector: External, Microphones, Pre Out, Rec Out
- OSC section with frequency control: 20-20,000 Hz and mode selector for square waves, sine waves, off, signal tone, pink noise
- Microphone section with connectors for 6.3mm jack plugs (Left, Right) with mix control and impedance selector for 600 Ohm, 500 kOhm, Mix, Off
- Center:
- Equalizer section with key selector:
- 4 bands selectable from -10 dB∼-10 dB and bandwidths 0.7-7 as well as frequencies 15-240 Hz, 63-1,000 Hz, 250-4,000 Hz, 1-16 kHz.
- Equalizer section with key selector:
- Right side:
- Phono selector for phono 1, 2:
- Input voltage selector for 2.5-10 mV
- Input selector for impedance: MM 22∼100 kOhm, MC 10∼220 Ohm
- Input selector for capacitance: 100pF∼500pF
- Tape 3 selector for input front or rear, PB, Rec Out
- Phono selector for phono 1, 2:
- Left side:
Remarks
- Previous model:
- 1973: SU-10000 preamp
- Successor model:
- 2018: preamplifier SU-R 1
- Other models in the "Century Series":
- Turntables:
- Cartridges:
- Preamplifier:
- Power amplifier:
- Cassette Tape Deck:
- Tape machine:
- Speakers:
- At the 1979 Tokyo Audio Fair, the Technics SH-P1 PCM audio processor was introduced to match the series. It was only built to order. It is not known if it was ever built for customers:
- PCM Audio Processor Technics SH-P1:
Pictures
- Image: Technics SU-A 2 front
- Picture: Technics SU-A 2 back
- Image: Technics century series consisting of:
- Technics SL-1000 MK 2 turntable
- pickup Technics EPC-100 C MK 3
preamplifier Technics SU-A 2 power amplifier Technics SE-A 1
- Cassette Tape Deck Technics RS-M 95
- Tape machine Technics RS-1800
- Loudspeaker Technics SB-10000
- Excerpt from brochure: Technics Combi SU-A 2 / SE-A 1
Reports
- Report at / some pictures from "Good Old Hifi": [1]
Links
- External link to website "Audio Database, Japan": [2]