Sansui PA-100
Data
General
- Manufacturer: Sansui
- Model: PA-100
- Type: Mono mixer amplifier
- Years of manufacture: 1973
- Made in: Japan
- Color: Black
- Remote control: -
- Power consumption: 150 W
- Dimensions: 440 x 130 x 284 mm
- Weight: 11.5 kg
- Original price approx.: 39'900 Yen (Japan, 1973), corresponds to about 600 DM
Connections
- Number of inputs:
- phono 1, 2: 2 mV, 50 kOhm
- Microphone 1: 0.15 mV, 600 Ohm
- Microphone 2, 3: 1.3 mV, 50 kOhm
- Aux 1, 2: 100 mV, 100 kOhm
- Number of outputs:
- Line Out: 2 V
- Monitor speaker built in
Technical Data
- Continuous power (at distortion factor)
- 8 Ohm: 1x 40 W (mono)
- 4 Ohm:
- Dynamic power
- 8 Ohm: 1x 60 W (mono)
- 4 Ohm:
- Total harmonic distortion: < 3 %
- Attenuation factor:
- Frequency response: 100 - 10'000 Hz
- Signal-to-noise ratio:
- Phono: > 65 dB
- Microphones: > 60 dB
High Level: > 70 dB
- Tone control:
- Bass: + 7 dB, - 9 dB at 70 Hz
- Treble: + 7 dB, - 8 dB at 10 kHz
Low Filter: - 6 dB at 70 Hz
- High Filter: - 10 dB at 10 kHz
Special Features
- 3x microphones connectable
- Microphone, aux and turntable front connectors 6.3 mm jack plug
Remarks
- mixer amplifier for three microphones and one turntable as well as a mono mixer amplifier, in which simultaneous mixing of a total of six circuits is possible from two auxiliary inputs
- the preamplifier and the power amplifier can be used independently of each other
- an output transformer is built in and can be used with many speakers
- A monitor speaker is built in
1x VU meter is built in
- Volume with operation indicator for each input
Pictures
- Excerpt from brochure: Sansui PA-100
