Sansui AU-111

Revision as of 09:29, 29 January 2019 by Hapeg2 (talk | contribs)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)

Data

General

  • Manufacturer: Sansui
  • Model: AU-111
  • Type: Integrated amplifier with tubes
  • Years of manufacture: 1965 - 1969
  • Made in: Japan
  • Color: Black
  • Remote control: -
  • Power consumption: 280 W
  • Dimensions (WxHxD): 459 x 170 x 344 mm
  • Weight: 24.3 kg
  • Original price approx.: 2'195 DM


Connections

  • Number of inputs:
    • Phono MM 1: switchable 0.006 mV, 3.5 ohms / 0.2 mV, 30 - 100 ohms.
    • Phono MM 2: 2 mV, 100 kOhm
    • Tuner: 220 mV, 100 kOhm
    • Aux 1. 2: 220 mV, 100 kOhm
    • Tape Play: 200 mV, 100 kOhm
  • Number of Outputs:
    • Tape Rec:
    • Pre Out: 2.1 V

Center Channel: 11.5 V

    • Headphones: 6.3 mm jack plug, 8 - 16 Ohm
    • 2 speaker pairs


Technical Data

  • Continuous power (at distortion factor)
    • 8 Ohm: 2x 40 W (both channels operated)

4 Ohm: 2x 45 W

  • Dynamic power
    • 8 Ohm: 2x 48 W
    • 4 Ohm: 2x 60 W
  • Total harmonic distortion: 0.8
  • Attenuation factor: 15 at 8 Ohm
  • Frequency response: 20 - 20'000 Hz
  • Signal-to-noise ratio:
    • Phono: > 70 dB

High Level: > 80 dB

  • Tone control:
    • Bass: ± 15 dB at 20 Hz
      • Crossover frequencies: 200 Hz, 400 Hz
    • Treble: ± 15 dB at 20'000 Hz
      • Crossover frequencies: 2.5 kHz, 5 kHz

Low Filter: - 21 dB at 20 Hz High Filter: - 22 dB at 20 kHz Loudness: + 8 dB at 50 Hz, + 5 dB at 10 kHz Muting: 0 dB, - 20 dB


Special Features

  • Pre- and power amplifier can be separated
  • Tone control L + R separate


Remarks



Pictures

  • Extract from brochure: Sansui AU-111

Sansui AU-111-Prospekt-1.jpg


Reports

  • Report from "Good Old Hifi": [[1]]


Links