Kenwood KR-100
Data
General
- Manufacturer: Kenwood
- Model: KR-100
- Year of manufacture: 1969 - 1971
- Made in: Japan
- Color: Silver, black, wood foil
- Remote control: No
- Power consumption: 170 W at full output / 40 W without signal
- Dimensions: 425 x 122 x 315 mm
- Weight: 10.2 kg
- Original price approx.: 1'600 DM
Connections
- Number of inputs:
- Phono 1,2: 2 mV / 50 kOhm
Aux: 200 mV / 50 kOhm
- Tape Play:
- Cinch: 200 mV / 50 kOhm
- DIN: 200 mV
- Main In: 100 mV
- Antenna: FM (75 Ohm Unbalanced / 300 Ohm Balanced), AM
- Tape Play:
- Number of Outputs:
- Tape Rec:
- Cinch: 200 mV / 50 kOhm
- DIN: 35 mV
- Dubbing: 200 mV
- Headphones
- 2 pairs of loudspeakers
- Tape Rec:
Technical Data Tuner Part
- Reception: FM, MW
- Frequencies:
- FM: 88 - 108 MHz
MW: 535 - 1605 kHz
- Frequency response:
- Input sensitivity:
- FM: 1.8µV
- MW: 15µV
- Distortion factor: < 0,5 %
- Signalrauschabstand: >60 dB
- Common mode selection: 2.5 dB
- Channel separation (1 kHz): > 35 dB
- selectivity:
- FM: > 45 dB
MW: > 25 dB
- Co-wave selection:
- FM: > 70 dB
MW: > 25 dB
- Spurious wave selection: > 45 dB
- Mirror frequency attenuation:
- FM: > 70 dB
- MW: > 90 dB
- IF attenuation: > 90 dB
- AM suppression:
Technical Data Amplifier Part
- Continuous power (at distortion factor)
- 8 Ohm: 2 x 40 W
- 4 Ohm: 2 x 50 W
- Dynamic power
- 8 Ohm: 110 W (IHF)
- 4 Ohm: 140 W (IHF)
- Total harmonic distortion: < 0.5 % at rated power
- Attenuation factor: 24 at 8 Ohm
- Frequency response: 20 - 30000 Hz ± 1.5 dB
- Power bandwidth (IHF): 20 - 30000 Hz
- Signal-to-noise ratio:
- Phono: 60 dB
AUX: 70 dB
- Tape: 70 dB
- Tone control:
- Bass: ± 10 dB at 100 Hz
Treble: ± 10 dB at 10 kHz
- Loudness: + 8 dB / 100 Hz, + 3 dB / 10 kHz
- Low Filter: 200 Hz cutoff
- High Filter: 3000 Hz Cutoff
Special Features
- Mono / Stereo switch
- Dubbing output front, 6.3 mm jack plug
- Pre- and power amplifier separable
- Center channel output
Notes
- Other models in the same series:
Pictures
- Extract from brochure: Kenwood KR-100
Reports
Links
</0,5>