Kenwood M-6000
Contents
Data
General
- Manufacturer: Trio Kenwood
- Model: M-6000
- Years of manufacture: 1970 - 1973
- Made in: Japan
- Color: Silver
- Type: Stereo power amplifier analog
- Remote control: no
- Power consumption: 190 W full scale, 15 W without signal
- Dimensions (WxHxD): 253 x 134 x 280 mm
- Weight: 8,5 kg
- Original price approx.: 52500 Yen (Japan, 1970), corresponds to about 600 DM
Connections
- Number of inputs: 2, switchable
- Input sensitivity 1, 2: 100mV/100kOhm, 1V/40kOhm, switchable, max. input signal 4V
- Number of outputs:
- 2 speaker pairs
- headphones
Technical Data
- Continuous power (at distortion factor)
- 8 Ohm: 2 x 55W RMS
- 4 Ohm: 2 x 65W (1 kHz)
- Dynamic power
- 8 Ohm: 160W IHF
- 4 Ohm: 180W IHF
- Total harmonic distortion: 0.1%
- Attenuation factor: 30 / 8 Ohm, 60 / 16 Ohm
- Frequency response: 10 Hz - 60 kHz
- Power bandwidth: 5 Hz - 60 kHz
- Signal to noise ratio:
- Stereo Channel Separation:
- Low Filter: 20 Hz cutoff at 12 dB/octave.
Special Features
- Kenwood recommended the power amplifier as an additional amplifier for the rear speakers of a system, this for example in combination with the Quadrixer KN-7044.
Comments
- Other models of the same series:
Kenwood recommended the Quadrixer for this purpose:
- [[Kenwood KN-7044
Pictures
- Kenwood M-6000 power amplifier:
- Excerpt from brochure: Trio Kenwood ATC concept
Reports
Links
- External link on website "Audio Heritage, Japan": [[1]]