Parasound HCA-1000
Data
General
- Manufacturer: Parasound
- Model: HCA-1000
- Years of manufacture: 1994-1998(?)
- Type: Power amplifier
- Remote control: no
- Power consumption: 500W
- Dimensions: 482 x 107 x 330 mm (WxHxD)
- Weight: 11kg
- Color: Black
- New price approx.: 1000€(?)
Connections
- Number of inputs: 1 stereo Cinch
- Number of outputs: none
Technical Data
- Continuous power at 8/4Ohm at distortion:
- RMS (20-20khz) 125/200w at <0.03% distortion on both channels simultaneously.
400w at 8Ohms in bridged operation
- Dynamic power
- 8 Ohm:
- 4 ohms:
- Total harmonic distortion:
- At full level: <0,03%
- Bei typischem Pegel: 0,01%
- Dämpfungsfaktor: >800 at 20 Hz
- Input (sensitivity/impedance)
1V/33kOhm
- Output (level/impedance):
- Frequency Response: 5 - 100,000 Hz (+0.-3db at 1W).
- Tone control
- Bass: not available
treble: not available
- Loudness: no
- Subsonic: no
- Mute: no
- Direct/LineStraight: no
- Ripple (short-circuited): >110dB, A-weighted
- Stereo Channel Separation:
- Signal Rasp Distance.
Special Features
- THX license
- Bridgeable via switch on rear panel
- Volume control for each channel on rear panel
- Dual-mono construction
775VA transformer
- 28500uF electrolytic capacitors
- Class A/AB
- 6.3A fuse
Remarks
Other models in the same series
- A successor model was released in 1998(?): Parasound HCA-1000A
- Smaller models:
- Larger models:
- Measured (minimum) consumption: approx. 22w
Pictures
Reports
Links
</0,03%>