Sony TC-WE 725

Data

General

• Brand: Sony

• Model: TC-WE 725

Specifications

• 4 tracks, 2 channels (stereo)
• Power supply: 220 - 230 V alternating voltage, 50/60 Hz
• Power consumption: 30 W
• Rewind time:
  • approx. 90 s (with Sony Cassette C-60).
  • with increased speed approx. 45 s (with Sony C-60 cassette)
• pre-magnetization
• Signal-to-noise ratio:
  • peak level, weighted, Dolby NR out:
    • Type I cassette (Sony Type I NORMAL): 55 dB.

Type II cassette (Sony Type II HIGH): 57 dB Type IV cassette (Sony Type IV METAL): 58 dB

• • with Dolby B noise reduction:
    • approx. 5 dB at 1 kHz
    • approx. 10 dB at 5 kHz
  • with Dolby C noise reduction:
    • approx. 15 dB at 500 Hz
    • approx. 20 dB at 1 kHz
• Distortion factor:
  • 0.4 % (with Type I cassette (Sony Type I NORMAL): 160 nWb/m, 315 Hz, 3rd order).

1.8% (with Type IV cassette (Sony Type IV METAL): 250 nWb/m, 315 Hz, 3rd order)

• Frequency response (Dolby NR ausg.):
  • Type I, Sony Type I (NORMAL):
    • 30 - 16,000 Hz (±3 dB, IEC).
    • 20 - 17,000 Hz (±6 dB)
  • Type II, Sony Type II (HIGH):
    • 30 - 17,000 Hz (±3 dB, IEC).
    • 20 - 18,000 Hz (±6 dB)
  • Type IV, Sony Type IV (METAL):
    • 30 - 19,000 Hz (±3 dB, IEC)
    • 20 - 20,000 Hz (±6 dB)
    • 30 - 13,000 Hz (±3 dB, -4 dB recording).
• Smooth running fluctuations:
  • ± 0.13 % w. peak (IEC).
  • ± 0.07 % W. RMS (NAB)
  • ± 0.18 % w. peak (DIN)
• Speed variation range of Pitch Control: approx. -30 to +30 %.
• Inputs:
  • Line inputs (RCA jacks): sensitivity: 0.16 V
• Input impedance: 47 kOhm
• Outputs:
  • Line outputs (Cinch sockets): Nominal output level: 0.5 V at 47 kOhm
• Load impedance: over 10 kOhm
• Headphones (stereo phone jack): Output level: 0.25 mW at 32 Ohm
• Dimensions (W x H x D): 430 x 120 x 290 mm
• Weight: 4.3 kg

Remarks

Other models of the same series:

Pictures