Difference between revisions of "SAC Igel PA 50 T"
(→Bemerkungen) |
(→Daten) |
||
| Line 1: | Line 1: | ||
__NOTOC__ | __NOTOC__ | ||
| − | == | + | == Data == |
| − | {{ | + | {{navigation}} |
| − | ''' | + | '''General''' |
| − | * | + | * Manufacturer: [[SAC]] |
| − | * | + | * Model: PA 50 T |
| − | * | + | * Years of manufacture: |
| − | * | + | * Made in: Germany |
| − | * | + | * Color: Black |
| − | * | + | * Type: Mono Analog |
| − | * | + | * Remote control: no |
| − | * | + | * Power consumption min./max. : 15 W /350 W |
| − | * | + | * Dimensions: 170 x 82 x 205 (W x H x D) |
| − | * | + | * Weight: 4,5kg |
| − | * | + | * New price approx.: (pair) |
| − | ''' | + | '''Connections''' |
| − | * | + | * Number of inputs: 1 |
| − | + | 1 x Chinch (with sensitivity/impedance) 22kOhm | |
| − | * | + | * Number of outputs: 1 |
| − | ** | + | ** Loudspeaker terminals with sockets for "banana" plugs |
| − | * | + | * Mains connection (220V): Permanently connected |
| − | ''' | + | '''Technical Data''' |
| − | * | + | * Continuous power (at distortion factor < 0,1% THD): |
** 8 Ohm: 75W (Herstellerangabe) | ** 8 Ohm: 75W (Herstellerangabe) | ||
** 4 Ohm: 110W (Herstellerangabe) | ** 4 Ohm: 110W (Herstellerangabe) | ||
| Line 32: | Line 32: | ||
** max. 15 A Strom | ** max. 15 A Strom | ||
* Gesamtklirrfaktor: | * Gesamtklirrfaktor: | ||
| − | * Dämpfungsfaktor > 600 | + | * Dämpfungsfaktor >600 (manufacturer's specification) |
| − | * | + | * Frequency response: 2Hz - 200khz (manufacturer's specification) |
| − | * | + | * Signal-to-noise ratio: 96 db (manufacturer's specification) |
| − | * | + | * Stereo channel separation: 98 db (manufacturer's specification) |
| − | ''' | + | '''Special Features''' |
| − | * | + | * Protection circuits for overtemperature, DC voltage, subsonic frequencies |
| + | == Remarks == | ||
| + | * First model of this series was the power amplifier [[SAC Igel PA 40]] , current model is The model [[SAC Hedgehog 60]] | ||
| + | The manufacturer offers an upgrade service ( 280 € ) in which sound-determining components are replaced by new ones (if necessary). In any case, new power supply electrolytic capacitors from Panasonic, lower inductance emitter resistors, fresh end transistors are used. Instead of Sanken 2SC2837 and 2SA1294 the same types from the Chinese-Indian company ISC are used. | ||
| + | Since mid 2010 a new circuit with a very high quality National Audio IC is used in the input stage. Until now this was an Ic of the type AD 797. The previous hedgehogs can ''not'' be brought to this level by an upgrade! | ||
| + | To this series also belongs the preamplifier "[[beta]]". | ||
| − | == | + | == Pictures == |
| − | |||
| − | |||
| − | |||
| − | |||
| − | == | + | == Reports == |
| − | |||
| − | |||
== Links == | == Links == | ||
| − | * | + | *Prospectus [http://www.sac.de/sac/Files/Download/Prospekte/pa50T-b.pdf] |
| − | *PA 50T | + | *PA 50T on SAC.com [http://www.sac.de/sac/start_frame.php?Pfad=11_54_21&BL=14] |
| − | [[ | + | [[Category:Power Amplifiers]]</0,1%> |
Latest revision as of 19:08, 20 December 2010
Data[edit]
General
- Manufacturer: SAC
- Model: PA 50 T
- Years of manufacture:
- Made in: Germany
- Color: Black
- Type: Mono Analog
- Remote control: no
- Power consumption min./max. : 15 W /350 W
- Dimensions: 170 x 82 x 205 (W x H x D)
- Weight: 4,5kg
- New price approx.: (pair)
Connections
- Number of inputs: 1
1 x Chinch (with sensitivity/impedance) 22kOhm
- Number of outputs: 1
- Loudspeaker terminals with sockets for "banana" plugs
- Mains connection (220V): Permanently connected
Technical Data
- Continuous power (at distortion factor < 0,1% THD):
- 8 Ohm: 75W (Herstellerangabe)
- 4 Ohm: 110W (Herstellerangabe)
- 2 Ohm: 140W (Herstellerangabe)
- Dynamikleistung
- max. 15 A Strom
- Gesamtklirrfaktor:
- Dämpfungsfaktor >600 (manufacturer's specification)
- Frequency response: 2Hz - 200khz (manufacturer's specification)
- Signal-to-noise ratio: 96 db (manufacturer's specification)
- Stereo channel separation: 98 db (manufacturer's specification)
Special Features
- Protection circuits for overtemperature, DC voltage, subsonic frequencies
Remarks[edit]
- First model of this series was the power amplifier SAC Igel PA 40 , current model is The model SAC Hedgehog 60
The manufacturer offers an upgrade service ( 280 € ) in which sound-determining components are replaced by new ones (if necessary). In any case, new power supply electrolytic capacitors from Panasonic, lower inductance emitter resistors, fresh end transistors are used. Instead of Sanken 2SC2837 and 2SA1294 the same types from the Chinese-Indian company ISC are used. Since mid 2010 a new circuit with a very high quality National Audio IC is used in the input stage. Until now this was an Ic of the type AD 797. The previous hedgehogs can not be brought to this level by an upgrade! To this series also belongs the preamplifier "beta".