Difference between revisions of "Grundig MV 100"

 
 
Line 1: Line 1:
−
Allgemein
+
'''General'''
−
Hersteller: Grundig  
+
Manufacturer: Grundig  
−
Modell: MV 100  
+
* Model: MV 100  
−
Baujahre:   
+
* Years of manufacture:   
−
Hergestellt in:  
+
* Made in:  
−
Farbe: Silber
+
* Color: Silver, Gold or Brown
−
Typ: Analog  
+
* Type: Analog  
−
Fernbedienung: Nein
+
* Remote control: No
−
Leistungsaufnahme:  
+
* Power consumption:  
−
Abmessungen: 270 x 60 x 230 mm (B x H x T)  
+
* Dimensions: 270 x 60 x 230 mm (W x H x D).
−
Gewicht:   
+
* Weight:   
−
Neupreis ca.:  
+
* New price approx:  
  
  
−
Anschlüsse
+
'''Connections'''
−
Anzahl der Eingänge:  
+
* Number of inputs:  
−
Phono DIN und Cinch 2 mV /47 kiloOhm
+
** Phono DIN and RCA 2 mV /47 kiloOhm.
−
2x Tape DIN 150 mV /220 kiloOhm (davon 1 auf der Front)  
+
2x Tape DIN 150 mV /220 kiloOhm (1 on the front)  
−
Tuner DIN 150 mV / 220 kiloOhm  
+
** Tuner DIN 150 mV / 220 kiloOhm.
−
Anzahl der Ausgänge:  
+
* Number of outputs:  
−
2x Tape DIN (davon 1 auf der Front)  
+
** 2x Tape DIN (1 of which is on the front).
−
Kopfhörer
+
** Headphones
−
2x Lautsprecher DIN
+
2x loudspeaker DIN
  
−
Technische Daten
+
'''Technical Data'''
−
Dauerleistung
+
* Continuous power''
−
Nur LS1 oder LS2:
+
** LS1 or LS2 only:
−
8 Ohm: 2 x 14 Watt Sinus
+
*** 8 Ohm: 2 x 14 Watt sine wave
−
4 Ohm: 2x 22,5 Watt Sinus
+
*** 4 Ohm: 2x 22.5 Watt sine wave
−
LS1 + LS2 an 8 Ohm:
+
** LS1 + LS2 at 8 Ohm:
−
4 x 11,25 Watt Sinus
+
*** 4 x 11.25 Watt sine wave
−
Dynamikleistung
+
* Dynamic power
−
Nur LS1 oder LS2:
+
** LS1 or LS2 only:
−
8 Ohm: 2 x 20 Watt  
+
*** 8 Ohm: 2 x 20 Watt  
−
4 Ohm: 2 x 40 Watt  
+
*** 4 Ohm: 2 x 40 Watt  
−
LS1 + LS2 an 8 Ohm:
+
** LS1 + LS2 at 8 Ohm:
−
4 x 20 Watt
+
*** 4 x 20 Watt
−
Klirrfaktor (bei Nennleistung):
+
Distortion factor (at nominal power):
−
=< 0,07% bei 1 kHz
+
** =&lt; 0.07% at 1 kHz
−
=< 0,25% für 40 Hz -20 kHz
+
** =&lt; 0.25% for 40 Hz -20 kHz
−
Intermodulation (bei Nennleistung):
+
* Intermodulation (at rated power): =&lt; 0,17%
−
=< 0,17%
+
* Attenuation factor (4 ohms): 40  
−
Dämpfungsfaktor (4 Ohm):
+
* Frequency response:  
−
40  
+
** TA 25 - 30 kHz - 3 dB, Tape, Tuner: 15 - 70 kHz -3 dB.
−
Frequenzgang:  
+
* Power bandwidth: < 10 Hz . . . >100 kHz
−
TA 25 - 30 kHz - 3 dB, Tape, Tuner: 15 - 70 kHz -3 dB  
+
* Signal-to-noise ratio:
−
Leistungsbandbreite:
+
** (effective/peak value according to DIN 45405) at nominal power.
−
< 10 Hz . . . > 100 kHz
+
*** Phono =&gt; 73/68 dB
−
Signalrauschabstand:
+
*** Tuner, TB =&gt; 93/89 dB
−
(Effektiv-/Spitzenwert nach DIN 45405)
+
** referred to 2 x 50 mW at 4 Ohm
−
bei Nennleistung
+
*** Phono =&gt; 67/63 dB
−
Phono => 73/68 dB
+
*** Tuner, TB =&gt; 69/64 dB  
−
Tuner, TB => 93/89 dB
+
* Stereo channel separation:  
−
bezogen auf 2 x 50 mW an 4 Ohm
+
** Tuner: =&gt; 82 dB
−
Phono => 67/63 dB
+
TB1: =&gt; 78 dB
−
Tuner, TB => 69/64 dB  
+
** TB2: =&gt; 82 dB
−
Stereokanaltrennung:  
+
** TA/Phono =&gt;70 dB  
−
Tuner: => 82 dB
+
* Tone control:  
−
TB1: => 78 dB
+
** Bass: +14/-15 dB at 40 Hz
−
TB2: => 82 dB
+
** Treble: +13/-13 at 16 kHz
−
TA/Phono =>70 dB  
+
* Balance: -13/+2.5 dB
−
Klangregelung:  
+
* Loudness: Yes
−
Bass: +14/-15 dB bei 40 Hz
+
* High Filter: No
−
Höhen: +13/-13 bei 16 kHz
+
* Low Filter (Subsonic): No
−
Balance: -13/+2,5 dB
+
* Mute: No
−
Loudness: Ja
+
* Direct/Line-Straight: No
−
High Filter: Nein
 
−
Low Filter (Subsonic): Nein
 
−
Mute: Nein
 
−
Direct/Line-Straight: Nein
 
  
  
−
Besondere Ausstattungen
+
'''Special Features'''
−
Leistungsanzeige durch 2 LED-Ketten
+
* Power display by 2 LED chains</10>

Latest revision as of 15:42, 17 May 2010

General Manufacturer: Grundig

  • Model: MV 100
  • Years of manufacture:
  • Made in:
  • Color: Silver, Gold or Brown
  • Type: Analog
  • Remote control: No
  • Power consumption:
  • Dimensions: 270 x 60 x 230 mm (W x H x D).
  • Weight:
  • New price approx:


Connections

  • Number of inputs:
    • Phono DIN and RCA 2 mV /47 kiloOhm.

2x Tape DIN 150 mV /220 kiloOhm (1 on the front)

    • Tuner DIN 150 mV / 220 kiloOhm.
  • Number of outputs:
    • 2x Tape DIN (1 of which is on the front).
    • Headphones

2x loudspeaker DIN

Technical Data

  • Continuous power
    • LS1 or LS2 only:
      • 8 Ohm: 2 x 14 Watt sine wave
      • 4 Ohm: 2x 22.5 Watt sine wave
    • LS1 + LS2 at 8 Ohm:
      • 4 x 11.25 Watt sine wave
  • Dynamic power
    • LS1 or LS2 only:
      • 8 Ohm: 2 x 20 Watt
      • 4 Ohm: 2 x 40 Watt
    • LS1 + LS2 at 8 Ohm:
      • 4 x 20 Watt

Distortion factor (at nominal power):

    • =< 0.07% at 1 kHz
    • =< 0.25% for 40 Hz -20 kHz
  • Intermodulation (at rated power): =< 0,17%
  • Attenuation factor (4 ohms): 40
  • Frequency response:
    • TA 25 - 30 kHz - 3 dB, Tape, Tuner: 15 - 70 kHz -3 dB.
  • Power bandwidth: < 10 Hz . . . >100 kHz
  • Signal-to-noise ratio:
    • (effective/peak value according to DIN 45405) at nominal power.
      • Phono => 73/68 dB
      • Tuner, TB => 93/89 dB
    • referred to 2 x 50 mW at 4 Ohm
      • Phono => 67/63 dB
      • Tuner, TB => 69/64 dB
  • Stereo channel separation:
    • Tuner: => 82 dB

TB1: => 78 dB

    • TB2: => 82 dB
    • TA/Phono =>70 dB
  • Tone control:
    • Bass: +14/-15 dB at 40 Hz
    • Treble: +13/-13 at 16 kHz
  • Balance: -13/+2.5 dB
  • Loudness: Yes
  • High Filter: No
  • Low Filter (Subsonic): No
  • Mute: No
  • Direct/Line-Straight: No


Special Features

  • Power display by 2 LED chains</10>
Retrieved from "https://hifi-wiki.com/index.php?title=Grundig_MV_100&oldid=55823"