Difference between revisions of "Camtech V102"

(→‎Daten)
(→‎Daten)
 
Line 1: Line 1:
 
__NOTOC__
 
__NOTOC__
−
== Daten ==
+
== Data ==
−
{{Navigation}}
+
{{navigation}}
−
'''Allgemein'''
+
'''General'''
−
* Hersteller: Cambridge Systems Technology
+
* Manufacturer: Cambridge Systems Technology
−
* Modell: V 102
+
* Model: V 102
−
* Baujahre: 1995 - 1998
+
* Year of manufacture: 1995 - 1998
−
* Hergestellt in:
+
* Made in: UK
−
* Farbe: schwarz
+
* Colour: black
−
* Typ: (Digital/Analog) analog
+
* Type: (Digital/Analogue) analogue
−
* Fernbedienung: nein
+
* Remote control: no
−
* Leistungsaufnahme: min. 25 VA / max. 250 VA
+
* Power consumption: min. 25 VA / max. 250 VA
−
* Abmessungen: (BxHxT) 445x74x318 mm
+
* Dimensions: (WxHxD) 445x74x318 mm.
−
* Gewicht: 8.0 kg
+
* Weight: 8.0 kg
−
* Neupreis ca.: 1.980.- DM
+
* Original price approx.: 1.980.- DM
  
  
−
'''Anschlüsse'''
+
'''Connections'''
−
* Anzahl der Eingänge:
+
* Number of inputs:
−
** Phono MM       3,750 mV an 47,0 kΩ und 85,0 pF
+
** Phono MM 3.750 mV at 47.0 kΩ and 85.0 pF.
−
**   Phono MC       0,250 mV an  0,1 kΩ und  3,3 nF
+
** Phono MC 0.250 mV at 0.1 kΩ and 3.3 nF
−
**   Tuner       185,0   mV an 20,0 kΩ
+
** Tuner 185.0 mV at 20.0 kΩ
−
** CD           185,0   mV an 20,0 kΩ   
+
CD 185.0 mV at 20.0 kΩ   
−
** Video       185,0   mV an 20,0 kΩ  
+
Video 185.0 mV at 20.0 kΩ  
−
** Tape1       185,0   mV an 20,0 kΩ  
+
Tape1 185.0 mV at 20.0 kΩ  
−
** Tape2       185,0   mV an 20,0 kΩ
+
Tape2 185.0 mV at 20.0 kΩ
−
** Main In     0,7 Volt   100 Ω
+
Main In 0.7 Volt 100 Ω
  
−
* Anzahl der Ausgänge:
+
* Number of Outputs:
 
** Video
 
** Video
 
** Tape1
 
** Tape1
 
** Tape2
 
** Tape2
−
** Pre Out       0,7 Volt an 1 kΩ, 100 Ω
+
** Pre Out 0.7 Volt at 1 kΩ, 100 Ω
−
** Speaker1     Direct oder Switched 4 -16 Ω
+
** Speaker1 Direct or Switched 4 -16 Ω
−
** Speaker2     Direct oder Switched 4 -16 Ω
+
Speaker2 Direct or Switched 4 -16 Ω
−
** Headphone     300Ω geeignet fuer Kopfhoerer mit 8 - 2000 Ohm
+
Headphone 300Ω suitable for headphones with 8 - 2000 Ohm
  
−
'''Technische Daten'''
+
'''Technical Data'''
−
* Dauerleistung (bei Klirrfaktor)
+
* Continuous power (at distortion).
−
** 8 Ohm: 45 + 45 Watt an 8 Ω (Nennleistung) >= 60 Watt 20-20.000 Hz < 0,5% TDH+N   
+
** 8 Ohm: 45 + 45 Watt at 8 Ω (nominal power) &gt;= 60 Watt 20-20.000 Hz < 0,5% TDH+N   
−
** 4 Ohm:                                    >=105 Watt  
+
** 4 Ohm:                                    >=105</0,5%> Watt < 0,5% TDH+N 
−
** 2 Ohm:                                    >=135 Watt     
+
** 4 Ohm:                                    >
−
* Dynamikleistung
+
** 2 Ohm: &gt;=135 Watt     
 +
* Dynamic power
 
** 8 Ohm:
 
** 8 Ohm:
 
** 4 Ohm:
 
** 4 Ohm:
−
** 2 Ohm: >= 180 Watt       
+
** 2 ohms: &gt;= 180 watts   
−
* Gesamtklirrfaktor: <= 0,05 %
+
* Total harmonic distortion: &lt;= 0.05 %
−
* Dämpfungsfaktor:
+
* Attenuation Factor:
−
* Frequenzgang:  
+
* Frequency Response:  
−
** Phono MC:                   <=± 1,0 db, 20 - 20.000 Hz
+
** Phono MC: &lt;=± 1.0 db, 20 - 20,000 Hz.
−
** Phono MM:                   <=± 0,5 db, 20 - 20.000 Hz
+
** Phono MM: &lt;=± 0.5 db, 20 - 20,000 Hz
−
** Tuner, CD, Video, Tape1+2   <=± 0,5 db, 20 - 20.000 Hz   
+
** Tuner, CD, Video, Tape1+2 <=± 0,5 db, 20 - 20.000 Hz   
 
* Signalrauschabstand:
 
* Signalrauschabstand:
−
** Phono MC                    >= - 72 db an 0,1 kΩ
+
** Phono MC                    >= - 72 db at 0,1 kΩ
−
** Phono MM                     >= - 78 db an 0,1 kΩ
+
Phono MM &gt;= - 78 db at 0.1 kΩ
−
** Tuner, CD, Video, Tape 1 + 2 >= - 95 db an 0,1 kΩ   
+
** Tuner, CD, Video, Tape 1 + 2 &gt;= - 95 db at 0.1 kΩ   
−
* Stereokanaltrennung:
+
* Stereo channel separation:
−
** 1 KHz           >= - 60 db
+
** 1 KHz &gt;= - 60 db
−
** 10 KHz           >= - 42 db
+
10 KHz &gt;= - 42 db
−
** 15 KHz           >= - 36 db
+
** 15 KHz &gt;= - 36 db
−
* Klangregelung:
+
* Tone control:
−
** Bass:       ± 6,0 db bei 20 Hz
+
** Bass: ± 6.0 db at 20 Hz
−
** Höhen:       ± 6,0 db bei 20 KHz
+
treble: ± 6.0 db at 20 KHz
−
* Loudness: nein
+
* Loudness: no
−
* High Filter: nein
+
* High Filter: no
−
* Low Filter (Subsonic): nein
+
* Low Filter (Subsonic): no
−
* Mute: nein
+
* Mute: no
−
* Direct/Line-Straight: nein
+
* Direct/Line-Straight: no
  
  
−
'''Besondere Ausstattungen'''
+
'''Special Features'''
 
* Record Out Selector
 
* Record Out Selector
  
−
== Bemerkungen ==
+
== Remarks ==
−
* Modell V 102L enthält ein anderes Schaltungskonzept und die Phonovorstufe fehlt.
+
Model V 102L contains a different circuit concept and the phono preamplifier is missing.
−
* Dt. Modell wurde nach Vorgaben der Fa. Puellmanns im Pegel der Phonovorstufe um 6 db abgesenkt.
+
* Dt. model was lowered after defaults of the company Puellmanns in the level of the Phonovorstufe around 6 db.
  
−
== Bilder ==
+
== Pictures ==
−
Beim V102L (das "L" steht für "line") fehlen die Klangregler, schaltbarer Lautsprechereingang, Phonoeingänge. Die Vorstufe ist um den Vorverstärkungsfaktor 6db abgesenkt worden. Es entfallen die Kabelbrücken am Vor,-Endverstärkeraus, bzw Eingang. Dies ist nun im Gerät mit Drahtbrücken gelöst. Das äußere Erscheinungsbild ist dem "Verstärker" sehr ähnlich (aber der V102L ist nicht fernbedienbar). Die Lautsprecherterminals nehmen keine Bananas auf. Der V102L ist das letzte von CAMTECH vertriebene Gerät und war nur wenige Monate am Markt.
+
The V102L (the "L" stands for "line") lacks tone controls, switchable speaker input, phono inputs. The preamp has been lowered by the preamp gain factor 6db. The cable bridges at the preamplifier, power amplifier output and input are omitted. This is now solved in the device with wire bridges. The outer appearance is very similar to the "amplifier" (but the V102L cannot be remote controlled). The speaker terminals do not accept bananas. The V102L is the last unit distributed by CAMTECH and was only on the market for a few months.
  
−
== Berichte ==
+
== Reviews ==
  
 
== Links ==
 
== Links ==
  
−
[[Kategorie:Vollverstärker]]
+
[[Category:Integrated amplifier]]</=±></0,5%>

Latest revision as of 04:26, 7 October 2009

Data[edit]

General

  • Manufacturer: Cambridge Systems Technology
  • Model: V 102
  • Year of manufacture: 1995 - 1998
  • Made in: UK
  • Colour: black
  • Type: (Digital/Analogue) analogue
  • Remote control: no
  • Power consumption: min. 25 VA / max. 250 VA
  • Dimensions: (WxHxD) 445x74x318 mm.
  • Weight: 8.0 kg
  • Original price approx.: 1.980.- DM


Connections

  • Number of inputs:
    • Phono MM 3.750 mV at 47.0 kΩ and 85.0 pF.
    • Phono MC 0.250 mV at 0.1 kΩ and 3.3 nF
    • Tuner 185.0 mV at 20.0 kΩ

CD 185.0 mV at 20.0 kΩ Video 185.0 mV at 20.0 kΩ Tape1 185.0 mV at 20.0 kΩ Tape2 185.0 mV at 20.0 kΩ Main In 0.7 Volt 100 Ω

  • Number of Outputs:
    • Video
    • Tape1
    • Tape2
    • Pre Out 0.7 Volt at 1 kΩ, 100 Ω
    • Speaker1 Direct or Switched 4 -16 Ω

Speaker2 Direct or Switched 4 -16 Ω Headphone 300Ω suitable for headphones with 8 - 2000 Ohm

Technical Data

  • Continuous power (at distortion).
    • 8 Ohm: 45 + 45 Watt at 8 Ω (nominal power) >= 60 Watt 20-20.000 Hz < 0,5% TDH+N
    • 4 Ohm: >=105</0,5%> Watt < 0,5% TDH+N
    • 4 Ohm: >
    • 2 Ohm: >=135 Watt
  • Dynamic power
    • 8 Ohm:
    • 4 Ohm:
    • 2 ohms: >= 180 watts
  • Total harmonic distortion: <= 0.05 %
  • Attenuation Factor:
  • Frequency Response:
    • Phono MC: <=± 1.0 db, 20 - 20,000 Hz.
    • Phono MM: <=± 0.5 db, 20 - 20,000 Hz
    • Tuner, CD, Video, Tape1+2 <=± 0,5 db, 20 - 20.000 Hz
  • Signalrauschabstand:
    • Phono MC >= - 72 db at 0,1 kΩ

Phono MM >= - 78 db at 0.1 kΩ

    • Tuner, CD, Video, Tape 1 + 2 >= - 95 db at 0.1 kΩ
  • Stereo channel separation:
    • 1 KHz >= - 60 db

10 KHz >= - 42 db

    • 15 KHz >= - 36 db
  • Tone control:
    • Bass: ± 6.0 db at 20 Hz

treble: ± 6.0 db at 20 KHz

  • Loudness: no
  • High Filter: no
  • Low Filter (Subsonic): no
  • Mute: no
  • Direct/Line-Straight: no


Special Features

  • Record Out Selector

Remarks[edit]

Model V 102L contains a different circuit concept and the phono preamplifier is missing.

  • Dt. model was lowered after defaults of the company Puellmanns in the level of the Phonovorstufe around 6 db.

Pictures[edit]

The V102L (the "L" stands for "line") lacks tone controls, switchable speaker input, phono inputs. The preamp has been lowered by the preamp gain factor 6db. The cable bridges at the preamplifier, power amplifier output and input are omitted. This is now solved in the device with wire bridges. The outer appearance is very similar to the "amplifier" (but the V102L cannot be remote controlled). The speaker terminals do not accept bananas. The V102L is the last unit distributed by CAMTECH and was only on the market for a few months.

Reviews[edit]

Links[edit]

</=±></0,5%>

Retrieved from "https://hifi-wiki.com/index.php?title=Camtech_V102&oldid=47418"