Difference between revisions of "Tascam DA-30 MK II"

Revision as of 16:30, 19 February 2009

Tape Speed: 8.5 mm/sec, (12.225 mm/sec.)
Quantization Bit: 16-bit linear (SP); 12 bit nonlinear (LP)
Sampling Rate: Recording: 48 kHz/44.1 (digital, analog input); 32 kHz (digital input only)
Frequency Response: 20 Hz - 20 kHz +/- .5dB 9SP) 20 HZ - 14.5 kHz +/- .5dB (LP)
Signal to Noise Ratio: Better than 92 db
Dynamic Range: Better than 93 db
Total Harmonic Distortion: 0.004% at 1 kHz (SP) .07% at 1 kHz (LP)
Channel Separation: Better than 85 db (at 1 kHz)
Wow and Flutter: Unmeasurable (less than 0.001%)
Analog Input: (XLR) balanced, +4 dBm / 10k ohm (RCA) unbalanced, -10 dB V /50k ohm
Analog Output: (XLR) balanced, +4 dBm/10k ohm, (RCA) unbalanced, -10 dBV (+6 dBV max)/ 430 ohm;
Output Level: 100mW or more (8-ohm load)
Headphone Output: 1/4" phone jack (x1), 100 mW + 100 mW (8 ohm)
Digital I/O:
(XLR) AES/EBU (RCA) Coaxial (S/PDIF); Parallel Control I/O Port: D-sub
15-pin (female)
Independent left and right channel
AES/EBU and S/PDIF Digital I/O
Balanced and unbalanced I/O
48/44.1/32 kHz sampling frequencies
SCMS free recording
Built-in parallel interface
8,5 kg

@@ Line 1: / Line 1: @@
+{{nicht vorlagenkonform}}
 *Tape Speed:     	    8.5 mm/sec, (12.225 mm/sec.)
 *Quantization Bit:     	    16-bit linear (SP); 12 bit nonlinear (LP)