Difference between revisions of "Audio Technica AT 3200 XE II"
(→Bemerkungen) |
(→Daten) |
||
| Line 1: | Line 1: | ||
__NOTOC__ | __NOTOC__ | ||
| − | == | + | == Data == |
| − | {{ | + | {{navigation}} |
| − | ''' | + | '''General''' |
| − | * | + | * Manufacturer: [[Audio Technica]] |
| − | * | + | * Model: AT 3200 XE II |
| − | * | + | * Year of manufacture: 1980 onwards |
| − | * | + | * Made in: Japan |
| − | * | + | * Color: various |
| − | * | + | * Dimensions: |
| − | ** AT 3200 XE: 30 | + | ** AT 3200 XE: 30.9 x 17.1 x 16.7 mm |
| − | ** AT 3200 XE/H: 68 | + | ** AT 3200 XE/H: 68.4 x 35.5 x 25.0 mm |
| − | * | + | * Weight: |
| − | ** AT 3200 XE: 4 | + | ** AT 3200 XE: 4.3 g |
| − | ** AT 3200 XE/H: 16 | + | ** AT 3200 XE/H: 16.3 g |
| − | * | + | * Original price approx: |
| − | ''' | + | '''Technical Data''' |
| − | * | + | * Principle: Moving Coil |
| − | * | + | * Frequency response: 15 - 30,000 Hz |
| − | * | + | * Channel separation: |
| − | * | + | * Channel balance: 1.5dB |
| − | * | + | * Crosstalk attenuation: > 30dB (1 kHz) |
| − | * | + | * Output voltage: 2.0 mV (1 kHz, 5 cm/s) |
| − | * | + | * Terminating resistor: 47 kOhm |
| − | * | + | * Inductance: 0.56 mH (1 kHz) |
| − | * | + | * Needle type: Bare diamond with ellipse cut |
| − | * | + | * Recommended contact force: 1.4 - 2.0 g (optimum 1.7 g) |
| − | * | + | * Needle compliance: |
| − | ** | + | ** Dynamic: 7.5 x 10-6 cm/dyn. |
| − | + | Static: 30 x 10-6 cm/dyn | |
| − | * | + | * Vertical tracking angle: 20 |
| − | * | + | * Coil impedance: 110 Ohm (1 kHz) |
| − | * | + | * Coil inductance: 0.56 mH (1kHz) |
| − | ''' | + | '''Special Features''' |
| − | * | + | * Needle carrier is exchangeable! |
| − | * | + | * The AT-3200XE/H is supplied with light metal system carrier with overhang fine adjustment |
| − | == | + | == Remarks == |
| − | + | Other models in the same series: | |
*[[Audio Technica AT3100E|AT3100E]] | *[[Audio Technica AT3100E|AT3100E]] | ||
*[[Audio Technica AT3100XE|AT3100XE]] | *[[Audio Technica AT3100XE|AT3100XE]] | ||
| Line 48: | Line 48: | ||
*[[Audio Technica AT3200XE|AT3200XE]] | *[[Audio Technica AT3200XE|AT3200XE]] | ||
*[[Audio Technica AT3200XEII|AT3200XEII]] | *[[Audio Technica AT3200XEII|AT3200XEII]] | ||
| − | * | + | *[[Audio Technica AT3200XE|AT3200XEII]] all have an interchangeable needle carrier |
| − | * | + | * These cartridges were supplied in different colours (ws/gr/bl/ge/sw) to OEMs (Dual/Sansui/Thorens etc.) for original equipment |
| − | == | + | == Pictures == |
| − | [[ | + | [[Image:AT3200XE.jpg]] |
| − | == | + | == Reports == |
== Links == | == Links == | ||
| − | [[ | + | [[Category:Pickups]] |
Latest revision as of 04:27, 21 October 2008
Data[edit]
General
- Manufacturer: Audio Technica
- Model: AT 3200 XE II
- Year of manufacture: 1980 onwards
- Made in: Japan
- Color: various
- Dimensions:
- AT 3200 XE: 30.9 x 17.1 x 16.7 mm
- AT 3200 XE/H: 68.4 x 35.5 x 25.0 mm
- Weight:
- AT 3200 XE: 4.3 g
- AT 3200 XE/H: 16.3 g
- Original price approx:
Technical Data
- Principle: Moving Coil
- Frequency response: 15 - 30,000 Hz
- Channel separation:
- Channel balance: 1.5dB
- Crosstalk attenuation: > 30dB (1 kHz)
- Output voltage: 2.0 mV (1 kHz, 5 cm/s)
- Terminating resistor: 47 kOhm
- Inductance: 0.56 mH (1 kHz)
- Needle type: Bare diamond with ellipse cut
- Recommended contact force: 1.4 - 2.0 g (optimum 1.7 g)
- Needle compliance:
- Dynamic: 7.5 x 10-6 cm/dyn.
Static: 30 x 10-6 cm/dyn
- Vertical tracking angle: 20
- Coil impedance: 110 Ohm (1 kHz)
- Coil inductance: 0.56 mH (1kHz)
Special Features
- Needle carrier is exchangeable!
- The AT-3200XE/H is supplied with light metal system carrier with overhang fine adjustment
Remarks[edit]
Other models in the same series:
- AT3100E
- AT3100XE
- AT3100XEII
- AT3200E
- AT3200XE
- AT3200XEII
- AT3200XEII all have an interchangeable needle carrier
- These cartridges were supplied in different colours (ws/gr/bl/ge/sw) to OEMs (Dual/Sansui/Thorens etc.) for original equipment
Pictures[edit]
