Difference between revisions of "Kenwood KR-820"
Mindtwister (talk | contribs) (→Bilder) |
|||
Line 1: | Line 1: | ||
__NOTOC__ | __NOTOC__ | ||
− | == | + | == Data == |
− | {{ | + | {{navigation}} |
− | ''' | + | '''General''' |
− | * | + | * Manufacturer: [[Kenwood]] |
− | * | + | * Model: KR-820 |
− | * | + | * Years of manufacture: 1982 - 1984 |
− | * | + | * Made in: Korea |
− | * | + | * Color: Silver |
− | * | + | * Remote control: no |
− | * | + | * Power consumption: 155 W max. |
− | * | + | * Dimensions (WxHxD): 440 x 123 x 290 mm |
− | * | + | * Weight: 5.8 kg |
− | * | + | * Original price approx.: 750 DM |
− | ''' | + | '''Connections''' |
− | * | + | * Number of inputs: |
− | ** Phono MM: 2 | + | ** Phono MM: 2.5 mV, 50 kOhm, 150 mV max. |
** Tape Play 1, 2: 150 mV, 50 kOhm | ** Tape Play 1, 2: 150 mV, 50 kOhm | ||
** Tape Play DIN 1, 2: 150 mV, 50 kOhm | ** Tape Play DIN 1, 2: 150 mV, 50 kOhm | ||
− | + | FM antenna: 75 Ohm, 300 Ohm | |
− | ** MW | + | ** MW antenna: 300 Ohm |
− | * | + | * Number of outputs: |
** Tape Rec 1, 2: 150 mV, 30 kOhm | ** Tape Rec 1, 2: 150 mV, 30 kOhm | ||
** Tape Rec DIN: 30 mV, 80 kOhm | ** Tape Rec DIN: 30 mV, 80 kOhm | ||
− | ** | + | ** Headphones (6.3mm jack): |
− | ** 2 | + | ** 2 speaker pairs |
− | ''' | + | '''Technical Data''' |
− | '' | + | ''Amplifier'' |
− | * | + | * Continuous power (at distortion) |
** 8 Ohm: 2x 33 W (RMS, 20 - 20'000 Hz) | ** 8 Ohm: 2x 33 W (RMS, 20 - 20'000 Hz) | ||
** 4 Ohm: 2x 45 W | ** 4 Ohm: 2x 45 W | ||
− | * | + | * Dynamic power |
** 8 Ohm: | ** 8 Ohm: | ||
** 4 Ohm: 180 W | ** 4 Ohm: 180 W | ||
− | * | + | * Total harmonic distortion: 0.03 % |
− | * | + | * Attenuation factor: 50 at 8 Ohm |
− | * | + | * Frequency response: |
** Phono: 20 - 20'000 Hz, ± 0,3 dB | ** Phono: 20 - 20'000 Hz, ± 0,3 dB | ||
− | ** | + | ** High level: 5 - 160'000 Hz, + 0 dB, - 3 dB |
− | * | + | * Signal-to-noise ratio: |
** Phono MM: 74 dB | ** Phono MM: 74 dB | ||
** Line: 100 dB | ** Line: 100 dB | ||
− | * | + | * Tone control: |
− | ** Bass: ± 8 dB | + | ** Bass: ± 8 dB at 100 Hz |
− | + | Treble: ± 8 dB at 10 kHz | |
− | * Loudness: + 10 dB | + | * Loudness: + 10 dB at 100 Hz |
− | * High Filter: - 6 dB | + | * High Filter: - 6 dB at 5 Hz |
* Low Filter (Subsonic): | * Low Filter (Subsonic): | ||
* Mute: | * Mute: | ||
Line 56: | Line 56: | ||
''Tuner'' | ''Tuner'' | ||
− | * | + | * Reception: FM, MW |
− | * | + | * Frequencies: |
− | ** | + | ** FM: 87.5 - 108 MHz |
** MW: 530 - 1610 kHz | ** MW: 530 - 1610 kHz | ||
− | * | + | * Input sensitivity: |
− | ** | + | ** FM: 1.9 µV |
** MW: 10 µV | ** MW: 10 µV | ||
− | * | + | * Frequency response: 30 - 15'000 Hz, + 0,5 dB, - 1 dB |
− | * | + | * Distortion factor: |
− | ** Mono: 0 | + | ** Mono: 0.1 % |
− | ** Stereo: 0 | + | ** Stereo: 0.15 % |
− | * | + | * Signal-to-noise ratio: |
− | ** | + | ** FM mono: 75 dB |
− | + | FM stereo: 71 dB | |
− | * | + | * Channel separation: 40 dB |
− | * | + | * selectivity: 75 dB |
− | * | + | * Co-wave selection: 1.0 dB |
− | * | + | * Spurious wave selection: 50 dB |
− | * | + | * Image frequency attenuation: 45 dB |
− | * | + | * IF attenuation: 95 dB |
− | * MW | + | * MW suppression: 68 dB |
− | * | + | * Station memory: 6 FM, 6 MW |
− | ''' | + | '''Special Features''' |
− | * Timer | + | * Timer switch |
* Tape Dubbing | * Tape Dubbing | ||
− | * | + | * Automatic station search |
− | * Mono / Stereo | + | * Mono / Stereo switchable |
− | == | + | == Remarks == |
− | * | + | * Other models in the same series: |
* [[Kenwood KR-90]] | * [[Kenwood KR-90]] | ||
* [[Kenwood KR-810]] | * [[Kenwood KR-810]] | ||
Line 97: | Line 97: | ||
− | == | + | == Pictures == |
− | * | + | * Extract from brochure: Kenwood KR-90, KR-820, KR-830, KR-850 |
− | [[ | + | [[File:Kenwood KR-820.jpg]] |
− | == | + | * Part of leaflet Kenwood KR-820 |
+ | [[File:Kenwood KR-820.jpg]] | ||
+ | |||
+ | == Reports == | ||
Line 108: | Line 111: | ||
− | [[ | + | [[Category:Receiver]] |
Latest revision as of 07:30, 7 April 2021
Data[edit]
General
- Manufacturer: Kenwood
- Model: KR-820
- Years of manufacture: 1982 - 1984
- Made in: Korea
- Color: Silver
- Remote control: no
- Power consumption: 155 W max.
- Dimensions (WxHxD): 440 x 123 x 290 mm
- Weight: 5.8 kg
- Original price approx.: 750 DM
Connections
- Number of inputs:
- Phono MM: 2.5 mV, 50 kOhm, 150 mV max.
- Tape Play 1, 2: 150 mV, 50 kOhm
- Tape Play DIN 1, 2: 150 mV, 50 kOhm
FM antenna: 75 Ohm, 300 Ohm
- MW antenna: 300 Ohm
- Number of outputs:
- Tape Rec 1, 2: 150 mV, 30 kOhm
- Tape Rec DIN: 30 mV, 80 kOhm
- Headphones (6.3mm jack):
- 2 speaker pairs
Technical Data
Amplifier
- Continuous power (at distortion)
- 8 Ohm: 2x 33 W (RMS, 20 - 20'000 Hz)
- 4 Ohm: 2x 45 W
- Dynamic power
- 8 Ohm:
- 4 Ohm: 180 W
- Total harmonic distortion: 0.03 %
- Attenuation factor: 50 at 8 Ohm
- Frequency response:
- Phono: 20 - 20'000 Hz, ± 0,3 dB
- High level: 5 - 160'000 Hz, + 0 dB, - 3 dB
- Signal-to-noise ratio:
- Phono MM: 74 dB
- Line: 100 dB
- Tone control:
- Bass: ± 8 dB at 100 Hz
Treble: ± 8 dB at 10 kHz
- Loudness: + 10 dB at 100 Hz
- High Filter: - 6 dB at 5 Hz
- Low Filter (Subsonic):
- Mute:
Tuner
- Reception: FM, MW
- Frequencies:
- FM: 87.5 - 108 MHz
- MW: 530 - 1610 kHz
- Input sensitivity:
- FM: 1.9 µV
- MW: 10 µV
- Frequency response: 30 - 15'000 Hz, + 0,5 dB, - 1 dB
- Distortion factor:
- Mono: 0.1 %
- Stereo: 0.15 %
- Signal-to-noise ratio:
- FM mono: 75 dB
FM stereo: 71 dB
- Channel separation: 40 dB
- selectivity: 75 dB
- Co-wave selection: 1.0 dB
- Spurious wave selection: 50 dB
- Image frequency attenuation: 45 dB
- IF attenuation: 95 dB
- MW suppression: 68 dB
- Station memory: 6 FM, 6 MW
Special Features
- Timer switch
- Tape Dubbing
- Automatic station search
- Mono / Stereo switchable
Remarks[edit]
- Other models in the same series:
- Kenwood KR-90
- Kenwood KR-810
- Kenwood KR-820
- Kenwood KR-830
- Kenwood KR-850
- Kenwood KR-1000
Pictures[edit]
- Extract from brochure: Kenwood KR-90, KR-820, KR-830, KR-850
- Part of leaflet Kenwood KR-820