Difference between revisions of "Rotel RB-951"

(Die Seite wurde neu angelegt: „* Continuous Power Output Stereo Mode (20-20 kHz, < 0.03% THD) 50 watts/ch into 8 ohms * Continuous Power Output Bridged Mono Mode (20-20 kHz, < 0.1% THD) 150 wat…“)
 
 
Line 1: Line 1:
* Continuous Power Output Stereo Mode (20-20 kHz, < 0.03% THD) 50 watts/ch into 8 ohms
+
Continuous Power Output Stereo Mode (20-20 kHz, &lt; 0.03% THD) 50 watts/ch into 8 ohms
* Continuous Power Output Bridged Mono Mode (20-20 kHz, < 0.1% THD) 150 watts/ch into 8 ohms
+
Continuous Power Output Bridged Mono Mode (20-20 kHz, &lt; 0.1% THD) 150 watts/ch into 8 ohms
* Total Harmonic Distortion (20Hz-20kHz, 8 ohms) < 0.03%
+
* Total Harmonic Distortion (20Hz-20kHz, 8 ohms) &lt; 0.03%
* Intermodulation Distortion (60 Hz : 7 kHz, 4:1) < 0.03%
+
* Intermodulation Distortion (60 Hz : 7 kHz, 4:1) &lt; 0.03%
 
* Frequency Response (±1 dB) : 15Hz-100kHz
 
* Frequency Response (±1 dB) : 15Hz-100kHz
 
* Damping Factor (20-20,000 Hz, 8 ohms) : 280
 
* Damping Factor (20-20,000 Hz, 8 ohms) : 280
* Speaker Impedance (combined load) : Stereo mode: 4 ohms minimum Bridged Mono mode: 8 ohms minimum Parallel Mono mode: 2 ohms minimum
+
Speaker Impedance (combined load) : Stereo mode: 4 ohms minimum Bridged Mono mode: 8 ohms minimum Parallel Mono mode: 2 ohms minimum
* Signal to Noise Ratio (IHF A network) : 116 dB
+
Signal to Noise Ratio (IHF A network) : 116 dB
 
* Auto Turn Off Delay Time (if activated) 5 minutes with no signal
 
* Auto Turn Off Delay Time (if activated) 5 minutes with no signal
 
* Power Requirements USA: 115 Volts, 60 Hz Europe: 230 Volts, 50 Hz
 
* Power Requirements USA: 115 Volts, 60 Hz Europe: 230 Volts, 50 Hz
Line 12: Line 12:
 
* Dimensions (W x H x D) 440 x 92 x 334 mm 173/8 x 35/8 x 131/4 in
 
* Dimensions (W x H x D) 440 x 92 x 334 mm 173/8 x 35/8 x 131/4 in
 
* Weight (net) 6.8 kg, 15 lb.
 
* Weight (net) 6.8 kg, 15 lb.
 +
* Original price approx.: 699 DM

Latest revision as of 09:28, 7 December 2019

Continuous Power Output Stereo Mode (20-20 kHz, < 0.03% THD) 50 watts/ch into 8 ohms Continuous Power Output Bridged Mono Mode (20-20 kHz, < 0.1% THD) 150 watts/ch into 8 ohms

  • Total Harmonic Distortion (20Hz-20kHz, 8 ohms) < 0.03%
  • Intermodulation Distortion (60 Hz : 7 kHz, 4:1) < 0.03%
  • Frequency Response (±1 dB) : 15Hz-100kHz
  • Damping Factor (20-20,000 Hz, 8 ohms) : 280

Speaker Impedance (combined load) : Stereo mode: 4 ohms minimum Bridged Mono mode: 8 ohms minimum Parallel Mono mode: 2 ohms minimum Signal to Noise Ratio (IHF A network) : 116 dB

  • Auto Turn Off Delay Time (if activated) 5 minutes with no signal
  • Power Requirements USA: 115 Volts, 60 Hz Europe: 230 Volts, 50 Hz
  • Power Consumption 200 Watts
  • Dimensions (W x H x D) 440 x 92 x 334 mm 173/8 x 35/8 x 131/4 in
  • Weight (net) 6.8 kg, 15 lb.
  • Original price approx.: 699 DM