Difference between revisions of "Kenwood KD-2055"
| Line 1: | Line 1: | ||
__NOTOC__ | __NOTOC__ | ||
| − | == | + | == Data == |
| − | {{ | + | {{navigation}} |
| − | ''' | + | '''General''' |
| − | * | + | * Manufacturer: [[Kenwood]] |
| − | * | + | * Model: KD-2055 |
| − | * | + | * Year of manufacture: 1976 - 1978 |
| − | * | + | * Made in: Japan |
| − | * | + | * Color: white / beige (ARCB material) |
| − | * | + | * Power consumption: 7 watts |
| − | * | + | * Dimensions: 480 x 146 x 363 mm (WxHxD) |
| − | * | + | * Weight: 11.0 Kg |
| − | * | + | * Original price approx.: 140 US-$, 550 DM |
| − | ''' | + | '''Connections''' |
| − | * | + | * Outputs: 2 x RCA (Cinch), ground wire |
| − | ''' | + | '''Technical data''' |
| − | * | + | * Drive: Semi-automatic turntable, driven by polyurethane flat belt, 4-pole synchronous motor. |
| − | * | + | * Speed: 33 1/3 and 45 rpm |
| − | * | + | * Synchronous speed fluctuation: less than 0.06% (WRMS) |
| − | * | + | * Rumble noise ratio: -62 dB |
| − | * | + | * Tonearm: low resonance and low mass S-shaped tubular tonearm |
| − | * | + | * Tonearm length: 215mm |
| − | * | + | * Overhang: 9,5mm |
| − | * | + | * Tracking force: 0 - 3 g |
| − | * | + | * platter: die-cast aluminium 30cm |
| − | * | + | * Operating mode: semi-automatic |
| − | * Pitch: | + | * Pitch: no |
| − | ''' | + | '''Cartridge System''' |
| − | * | + | * Type: Kenwood V-39 MK II (with EIA standard connector) |
| − | * | + | * Output voltage: 3 mV (b.1000 Hz and 5 cm/sec.) |
| − | * | + | * Frequency response: 20 - 20000 Hz |
| − | * | + | * Tracking force: 2.0 +/- 0.25 p |
| − | * | + | * Replacement needle: Type N-39 MK II |
| − | ''' | + | '''Special Features''' |
| − | * | + | * Anti-skating adjustment device with directly readable scale |
| − | == | + | == Remarks == |
| − | * | + | * Other models in the same series: |
* [[Kenwood KD-1033]] | * [[Kenwood KD-1033]] | ||
* [[Kenwood KD-2055]] | * [[Kenwood KD-2055]] | ||
| Line 53: | Line 53: | ||
| − | == | + | == Pictures == |
| − | * | + | * Image: Kenwood KD-2055 |
| − | [[ | + | [[File:Kenwood KD-2055.jpg]] |
| − | == | + | == Reports == |
| Line 64: | Line 64: | ||
| − | [[ | + | [[Category:Turntables]] |
Latest revision as of 03:43, 19 September 2019
Data[edit]
General
- Manufacturer: Kenwood
- Model: KD-2055
- Year of manufacture: 1976 - 1978
- Made in: Japan
- Color: white / beige (ARCB material)
- Power consumption: 7 watts
- Dimensions: 480 x 146 x 363 mm (WxHxD)
- Weight: 11.0 Kg
- Original price approx.: 140 US-$, 550 DM
Connections
- Outputs: 2 x RCA (Cinch), ground wire
Technical data
- Drive: Semi-automatic turntable, driven by polyurethane flat belt, 4-pole synchronous motor.
- Speed: 33 1/3 and 45 rpm
- Synchronous speed fluctuation: less than 0.06% (WRMS)
- Rumble noise ratio: -62 dB
- Tonearm: low resonance and low mass S-shaped tubular tonearm
- Tonearm length: 215mm
- Overhang: 9,5mm
- Tracking force: 0 - 3 g
- platter: die-cast aluminium 30cm
- Operating mode: semi-automatic
- Pitch: no
Cartridge System
- Type: Kenwood V-39 MK II (with EIA standard connector)
- Output voltage: 3 mV (b.1000 Hz and 5 cm/sec.)
- Frequency response: 20 - 20000 Hz
- Tracking force: 2.0 +/- 0.25 p
- Replacement needle: Type N-39 MK II
Special Features
- Anti-skating adjustment device with directly readable scale
Remarks[edit]
- Other models in the same series:
- Kenwood KD-1033
- Kenwood KD-2055
- Kenwood KD-3055
- Kenwood KD-500
- Kenwood KD-550
Pictures[edit]
- Image: Kenwood KD-2055
