Sanyo Plus 200

Daten

Allgemein

• Hersteller: Sanyo
• Modell: Plus 200
• Modellreihe: Plus Serie
• Typ: Receiver
• Baujahre: 1979 - 1981
• Hergestellt in: Japan
• Farbe: Silber, Schwarz
• Abmessungen (BxHxT): 440 x 132 x 282 mm (mit Griffen 500 mm breit)
• Gewicht: ca. 22 kg
• Neupreis ca.: 900 US-$, 2'200 DM

Power amp section: features full input -to -output dc coupling; fluid convection radiator; dual power supplies; may be separated with optional "umbilical" cord; dual 12 -LED peak power display with X0.01, X0.1, and X1 power display range selector; threeway speaker switching; 200 W/ch continuous, both channels driven into 4 or 8 ohms from 20-20,000 Hz with 0.009% THD; frequency response 7-100,000 Hz +0/-1 dB: S/N 110 dB (IHF A); damping factor 60; slew rate 170 V/Asec. Preamp section: features variable resistive and capacitive loading for MM cartridges (with selectors) and prepreamp for moving -coil cartridges; bass, midrange, and treble controls with tone defeat and bass and treble turnover frequency selectors; two-way tape dubbing and monitoring; subsonic and high filters; -20-dB muting and loudness switches; input selector with LEDs; external processor loop control; input sensitivity/impedance 2.5 mV/47k ohms (phono MM), 250 0/100 ohms (phono MC), 150 mV/47k ohms (aux. and tape); frequency response -±0.2 dB from 20-20,000 Hz (phono RIM), 20-20,000 Hz ±0.3 dB (aux. and tape); S/N (IHF A) 97 dB (phono MM), 70 dB (MC), 95 dB (aux. and tape); max. phono input 250 mV rms (MM), 25 mV rms (MC). Tuner: features "sampling quartz locked" tuning with frequency readout display; seven -LED signal-strength/multipath/deviation bar graph display; narrow/wide i-f bandwidth selector; FM multiplex filter; quartz locked, 25-Asec, FM de - emphasis, and FM muting switches; FM usable sensitivity 1.8 μV (mono); 50 -dB quieting 2.6 μV (mono), 36 μV (stereo); THD at 1000 Hz, mono 0.15% (narrow), 0.09% (wide), stereo 0.2% (narrow), 0.1% (wide); S/N 83 dB (mono), 78 dB (stereo); frequency response 20-15,000 Hz +0.5/ -1 dB; alternate channel selectivity 80 dB (narrow) and 55 dB (wide) at ±400 kHz; capture ratio 1.8 dB (narrow), 1.2 dB (wide)

Anschlüsse

• Eingänge:
  • Phono (MM/MC auf Rückseite umschaltbar):
    • Phono MM: 2,5mV / 47kOhm, 200 mV max.
    • Phono MC: 250µV / 100 Ohm, 20 mV max.
  • Tuner: 150mV / 47kOhm
  • Aux: 150mV / 47kOhm
  • Tape Play 1, 2: 150mV / 47kOhm
• Ausgänge:
  • Tape Rec 1, 2: 150mV / 47kOhm
  • Kopfhörer:
  • 2 Lautsprecherpaare

Technische Daten

• Dauerleistung (bei Klirrfaktor)
  • 8 Ohm: 2 x 75 W an 8 Ohm
  • 4 Ohm:
• Dynamikleistung
  • 8 Ohm:
  • 4 Ohm:
• Gesamtklirrfaktor: 0,03 %
• Dämpfungsfaktor:
• Frequenzgang: 10 Hz - 70 kHz
• Signalrauschabstand:
  • 95dB (line)
  • 86dB (MM), 70dB (MC)
• Klangregelung:
  • Bass: ± 10 dB (bei 100 Hz)
    • Kippfrequenzen einstellbar: 100 Hz, 200 Hz, 400 Hz
  • Mitten: ± 6 dB (bei 1 kHz)
  • Höhen: ± 10 dB (bei 10 kHz)
    • Kippfrequenzen einstellbar: 2,5 kHz, 5 kHz, 10 kHz
• Loudness: ja, + 10 dB bei 100 Hz, + 3 dB bei 10 kHz
• High Filter: 8 kHz (12 dB/oct)
• Low Filter (Subsonic): 37 Hz (12 dB/oct)
• Mute: -20 dB

Besondere Ausstattungen

• Phono MM/MC
• Rec out selector

Bemerkungen

• Weitere Modelle der gleichen Serie:
• Vollverstärker:
• Sanyo Plus A-35
• Sanyo Plus A-75

• Vorverstärker:
• Sanyo Plus C-55

• Endverstärker:
• Sanyo Plus P-55

• Tuner:
• Sanyo Plus T-35
• Sanyo Plus T-55

• Receiver:
• Sanyo Plus 55
• Sanyo Plus 75
• Sanyo Plus 130
• Sanyo Plus 200

• Tape Deck:
• Sanyo Plus D-45
• Sanyo Plus D-55
• Sanyo Plus D-60
• Sanyo Plus D-62
• Sanyo Plus D-64
• Sanyo Plus D-65
• Sanyo Plus D-80

• Plattenspieler:
• Sanyo Plus Q-25
• Sanyo Plus Q-40
• Sanyo Plus Q-50
• Sanyo Plus Q-60

• Rauschunterdrückung:
• Sanyo PLUS N-33
• Sanyo PLUS N 55

• PCM Audio Prozessor:
• Sanyo PCM Plus 10

• Timer:
• Sanyo Plus E-22
• Sanyo Plus E-33
• Sanyo Plus E-55

• Lautsprecher:
• Sanyo SXM-5500
• Sanyo SXM-8000

Bilder

• Auszug aus Prospekt: Sanyo Plus 200