Difference between revisions of "Yamaha CR-500"
m (Änderungen von Hapeg2 (Diskussion) wurden auf die letzte Version von 2A02:8070:8180:7E00:ED9C:CBC8:B3E1:8404 zurückgesetzt) (Tag: Rollback) |
|||
| Line 1: | Line 1: | ||
__NOTOC__ | __NOTOC__ | ||
| − | == | + | == Data == |
| − | {{ | + | {{navigation}} |
| − | ''' | + | '''General''' |
| − | * | + | * Manufacturer: [[Yamaha]] |
| − | * | + | * Model: CR-500 |
| − | * | + | * Year built: 1972 |
| − | * | + | * Made in: Japan |
| − | * | + | * Color: Silver |
| − | * | + | * Remote control: No |
| − | * | + | * Power consumption: 120 watts |
| + | * Dimensions: 420x300x140 mm | ||
| + | * Weight: 9,0 Kg | ||
| + | * Original price approx: | ||
| − | ''' | + | '''Connections''' |
| + | * Number of inputs: | ||
| + | **Phono 1: 3mV, 50kΩ. | ||
| + | **Phono 2: 3mV, 50kΩ | ||
| + | **AUX, | ||
| + | **Tape PB (PIN), | ||
| + | REC/PB (DIN): 200mV, 50kΩ | ||
| + | **Mic: 4mV, 50kΩ | ||
| + | **Main In: 775mV, 50kΩ | ||
| − | + | * Number of outputs: | |
| + | ** list the outputs here | ||
| − | + | '''Technical data''' | |
| − | |||
| − | |||
| − | |||
| − | |||
| + | '''Amplifier''' | ||
| + | * Continuous power (at distortion): | ||
| + | ** 8 Ohm: 22 Watt | ||
| + | * Dynamic power: | ||
| + | ** 8 ohms: 30 watts | ||
| + | * Total harmonic distortion: 0.05% | ||
| + | * Attenuation factor: | ||
| + | * Input (Sensitivity/Impedance). | ||
| + | ** list here | ||
| + | * Output (level/impedance): | ||
| + | ** list here | ||
| + | * Frequency response: 18-46000 Hz | ||
| + | * Tone control: | ||
| + | ** Bass: | ||
| + | ** Treble: | ||
| + | * Loudness: | ||
| + | * Subsonic: | ||
| + | * Mute: | ||
| + | * Direct/Line-Straight: | ||
| + | * Hum spacing (shorted): | ||
| + | * Stereo Channel Separation: | ||
| + | * Signal-to-noise ratio: | ||
| − | |||
| − | |||
| + | ''Tuner'' | ||
| + | * Reception: | ||
| + | * Frequencies: | ||
| + | ** FM: 88 - 108 Mhz | ||
| + | ** MW: 525 - 1605 kHz | ||
| + | * Frequency response: | ||
| + | * Input sensitivity: 2.0µV | ||
| + | * Distortion factor: | ||
| + | * Signal-to-noise ratio: 70dB | ||
| + | * Channel separation: | ||
| + | * Selectivity: 70dB | ||
| + | * Co-wave selection: | ||
| + | * Spurious wave selection: | ||
| + | * Image Frequency Attenuation: | ||
| + | * IF attenuation: | ||
| + | * AM suppression: | ||
| + | * Output level: | ||
| + | * RDS: | ||
| + | * Station memory: | ||
| − | |||
| − | |||
| − | |||
| − | |||
| + | '''Special Features''' | ||
| + | * here, if available | ||
| − | |||
| − | |||
| + | == Remarks == | ||
| + | Other models in the same series: | ||
| + | * [[Yamaha CR-510 LS|CR-510 LS]] | ||
| + | * [[Yamaha CR-700|CR-700]] | ||
| − | |||
| − | |||
| − | + | == Pictures == | |
| − | == | ||
| − | |||
http://img907.imageshack.us/img907/455/r7UHir.jpg | http://img907.imageshack.us/img907/455/r7UHir.jpg | ||
| − | |||
| − | |||
| − | |||
http://img911.imageshack.us/img911/6859/7Ox4G3.jpg | http://img911.imageshack.us/img911/6859/7Ox4G3.jpg | ||
| − | + | == Reports == | |
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | == | ||
| − | |||
== Links == | == Links == | ||
| − | + | [[Category:Receiver]] | |
| − | [[ | ||
Revision as of 16:36, 15 May 2019
Data
General
- Manufacturer: Yamaha
- Model: CR-500
- Year built: 1972
- Made in: Japan
- Color: Silver
- Remote control: No
- Power consumption: 120 watts
- Dimensions: 420x300x140 mm
- Weight: 9,0 Kg
- Original price approx:
Connections
- Number of inputs:
- Phono 1: 3mV, 50kΩ.
- Phono 2: 3mV, 50kΩ
- AUX,
- Tape PB (PIN),
REC/PB (DIN): 200mV, 50kΩ
- Mic: 4mV, 50kΩ
- Main In: 775mV, 50kΩ
- Number of outputs:
- list the outputs here
Technical data
Amplifier
- Continuous power (at distortion):
- 8 Ohm: 22 Watt
- Dynamic power:
- 8 ohms: 30 watts
- Total harmonic distortion: 0.05%
- Attenuation factor:
- Input (Sensitivity/Impedance).
- list here
- Output (level/impedance):
- list here
- Frequency response: 18-46000 Hz
- Tone control:
- Bass:
- Treble:
- Loudness:
- Subsonic:
- Mute:
- Direct/Line-Straight:
- Hum spacing (shorted):
- Stereo Channel Separation:
- Signal-to-noise ratio:
Tuner
- Reception:
- Frequencies:
- FM: 88 - 108 Mhz
- MW: 525 - 1605 kHz
- Frequency response:
- Input sensitivity: 2.0µV
- Distortion factor:
- Signal-to-noise ratio: 70dB
- Channel separation:
- Selectivity: 70dB
- Co-wave selection:
- Spurious wave selection:
- Image Frequency Attenuation:
- IF attenuation:
- AM suppression:
- Output level:
- RDS:
- Station memory:
Special Features
- here, if available
Remarks
Other models in the same series:
Pictures
