Difference between revisions of "Scott R-306 L"
Line 1: | Line 1: | ||
__NOTOC__ | __NOTOC__ | ||
− | == | + | == Data == |
− | {{ | + | {{navigation}} |
− | ''' | + | '''General''' |
− | * | + | * Manufacturer: [[Scott]] |
− | * | + | * Model: R-306 L, R-306 (without long wave) |
− | * | + | * Type: Receiver |
− | * | + | * Years of manufacture: 1976 - 1978 |
− | * | + | * Made in: Japan |
− | * | + | * Color: silver, wooden cabinet |
− | * | + | * Remote control: no |
− | * | + | * Power consumption: 100 W max. |
− | * | + | * Dimensions: 419 x 126 x 290 mm (WxHxD) |
− | * | + | * Weight: 10.5 kg |
− | * | + | * Original price approx.: 798 DM (with long wave) |
− | ''' | + | '''Connections''' |
− | * | + | * Number of inputs: |
− | ** Phono MM: 2 | + | ** Phono MM: 2.5 mV / 47 kOhm |
− | ** | + | ** Microphone: 6,0 mV / 47 kOhm |
** AUX: 150 mV / 60 kOhm | ** AUX: 150 mV / 60 kOhm | ||
** Tape Play Play: 150 mV / 60 kOhm | ** Tape Play Play: 150 mV / 60 kOhm | ||
− | ** | + | ** Antenna FM (75/300 Ohm), AM |
− | * | + | * Number of outputs: |
− | ** Tape Out (Cinch/DIN): 150 mV / 100 Ohm (Cinch); 30 mV / 80 kOhm (DIN) | + | ** Tape Out (Cinch/DIN): 150 mV / 100 Ohm (Cinch); 30 mV / 80 kOhm (DIN). |
− | ** | + | ** Headphones (6.3 mm jack, front) |
− | ** 2 | + | ** 2 pairs of loudspeakers |
− | ''' | + | '''Technical Data''' |
− | '' | + | ''Amplifier'' |
− | * | + | * Continuous power |
− | ** 8 Ohm: 2x 15 W (RMS, | + | ** 8 Ohm: 2x 15 W (RMS, both channels, 20-20'000 Hz, 0,5 %) |
** 4 Ohm: | ** 4 Ohm: | ||
− | * | + | * Dynamic power |
** 8 Ohm: | ** 8 Ohm: | ||
** 4 Ohm: | ** 4 Ohm: | ||
− | * | + | * Total harmonic distortion: 0.5 % (at nominal power) |
− | * | + | * Attenuation factor: |
− | * | + | * Frequency Response: 18 - 32,000 Hz (± 1 dB ) |
− | * | + | * Signal-to-noise ratio: |
** Phono MM: 75 dB | ** Phono MM: 75 dB | ||
− | ** | + | ** Microphone: 80 dB |
− | ** | + | ** High level: 85 dB |
− | * | + | * Tone control: |
− | ** Bass: ± 10 dB | + | ** Bass: ± 10 dB at 100 Hz |
− | + | Treble: ± 10 dB at 10 kHz | |
− | * Loudness: + 10 dB | + | * Loudness: + 10 dB at 50 Hz, + 3 dB at 10 kHz |
* High Filter: | * High Filter: | ||
* Low Filter (Subsonic): | * Low Filter (Subsonic): | ||
Line 55: | Line 55: | ||
''Tuner'' | ''Tuner'' | ||
− | * | + | * Reception: FM, MW, LW |
− | * | + | * Frequencies: |
− | ** | + | ** FM: 87.5 - 108 MHz |
− | + | MW: 525 - 1605 kHz | |
− | + | LW: 150 - 350 kHz | |
− | * | + | * Frequency response: 30 - 15'000 Hz (+0,2 dB / -1,5 dB, FM) |
− | * | + | * Input sensitivity: |
− | ** | + | ** FM: 2.2 µV (IHF) |
** MW: 100 µV | ** MW: 100 µV | ||
− | + | LW: 150 µV | |
− | + | Distortion factor: | |
− | ** | + | ** FM: 0.3% (mono), 0.5% (stereo). |
− | * | + | * Signal-to-noise ratio: |
− | ** | + | ** FM: 68 dB (mono), 63 dB (stereo) |
− | + | MW: 50 dB | |
− | * | + | * Channel separation: |
− | ** | + | ** FM: 40 dB (at 1 kHz) |
− | * | + | * Separation: (IHF) |
− | + | FM: 70 dB | |
** MW: 36 dB | ** MW: 36 dB | ||
− | * | + | * Equal wave selection: |
− | ** | + | ** FM: 1.5 dB |
− | * | + | * Spurious wave selection: |
− | ** | + | ** FM: 80 dB |
− | * | + | * Image frequency attenuation: |
− | ** | + | ** FM: 75 dB |
** MW: 40 dB | ** MW: 40 dB | ||
− | + | IF attenuation: | |
− | ** | + | ** FM: 90 dB |
** MW: 35 dB | ** MW: 35 dB | ||
− | * AM | + | * AM suppression: 45 dB |
− | ''' | + | '''Special Features''' |
− | * | + | * Microphone input |
− | == | + | == Remarks == |
− | * | + | * Other models in the same series: |
* [[Scott R-306 L]] | * [[Scott R-306 L]] | ||
* [[Scott R-316 L]] | * [[Scott R-316 L]] | ||
Line 101: | Line 101: | ||
− | == | + | == Pictures == |
− | * | + | * Extract from brochure: Scott R-306 L |
− | [[ | + | [[File:Scott R-306-Prospekt-11.jpg]] |
− | == | + | == Reports == |
Line 112: | Line 112: | ||
− | [[ | + | [[Category:Receiver]] |
Latest revision as of 09:40, 29 April 2019
Data[edit]
General
- Manufacturer: Scott
- Model: R-306 L, R-306 (without long wave)
- Type: Receiver
- Years of manufacture: 1976 - 1978
- Made in: Japan
- Color: silver, wooden cabinet
- Remote control: no
- Power consumption: 100 W max.
- Dimensions: 419 x 126 x 290 mm (WxHxD)
- Weight: 10.5 kg
- Original price approx.: 798 DM (with long wave)
Connections
- Number of inputs:
- Phono MM: 2.5 mV / 47 kOhm
- Microphone: 6,0 mV / 47 kOhm
- AUX: 150 mV / 60 kOhm
- Tape Play Play: 150 mV / 60 kOhm
- Antenna FM (75/300 Ohm), AM
- Number of outputs:
- Tape Out (Cinch/DIN): 150 mV / 100 Ohm (Cinch); 30 mV / 80 kOhm (DIN).
- Headphones (6.3 mm jack, front)
- 2 pairs of loudspeakers
Technical Data
Amplifier
- Continuous power
- 8 Ohm: 2x 15 W (RMS, both channels, 20-20'000 Hz, 0,5 %)
- 4 Ohm:
- Dynamic power
- 8 Ohm:
- 4 Ohm:
- Total harmonic distortion: 0.5 % (at nominal power)
- Attenuation factor:
- Frequency Response: 18 - 32,000 Hz (± 1 dB )
- Signal-to-noise ratio:
- Phono MM: 75 dB
- Microphone: 80 dB
- High level: 85 dB
- Tone control:
- Bass: ± 10 dB at 100 Hz
Treble: ± 10 dB at 10 kHz
- Loudness: + 10 dB at 50 Hz, + 3 dB at 10 kHz
- High Filter:
- Low Filter (Subsonic):
- Mute: - 20 dB
Tuner
- Reception: FM, MW, LW
- Frequencies:
- FM: 87.5 - 108 MHz
MW: 525 - 1605 kHz LW: 150 - 350 kHz
- Frequency response: 30 - 15'000 Hz (+0,2 dB / -1,5 dB, FM)
- Input sensitivity:
- FM: 2.2 µV (IHF)
- MW: 100 µV
LW: 150 µV Distortion factor:
- FM: 0.3% (mono), 0.5% (stereo).
- Signal-to-noise ratio:
- FM: 68 dB (mono), 63 dB (stereo)
MW: 50 dB
- Channel separation:
- FM: 40 dB (at 1 kHz)
- Separation: (IHF)
FM: 70 dB
- MW: 36 dB
- Equal wave selection:
- FM: 1.5 dB
- Spurious wave selection:
- FM: 80 dB
- Image frequency attenuation:
- FM: 75 dB
- MW: 40 dB
IF attenuation:
- FM: 90 dB
- MW: 35 dB
- AM suppression: 45 dB
Special Features
- Microphone input
Remarks[edit]
- Other models in the same series:
- Scott R-306 L
- Scott R-316 L
- Scott R-326 L
- Scott R-336
- Scott R-376
Pictures[edit]
- Extract from brochure: Scott R-306 L