Difference between revisions of "Technics SL-1610 MK 2"
| Line 1: | Line 1: | ||
__NOTOC__ | __NOTOC__ | ||
| − | == | + | == Data == |
| − | {{ | + | {{navigation}} |
| − | ''' | + | '''General''' |
| − | * | + | * Manufacturer: [[Technics]] |
| − | * | + | * Model: SL-1610 MKII |
| − | * | + | * Type: Record player |
| − | * | + | * Years of manufacture: 1977 - 1979 |
| − | * | + | * Made in: Japan |
| − | * | + | * Color: Black |
| − | * | + | * Power consumption: 18,5 W |
| − | * | + | * Dimensions: 453 x 149 x 399 mm (WxHxD) |
| − | * | + | * Weight: 10 kg |
| − | * | + | * Original price approx.: 990 DM |
| − | ''' | + | '''Connections''' |
| − | * | + | * Outputs: 2 x Cinch (cable fixed), 1 x ground connection (fixed) |
| − | * | + | * Inputs: None |
| − | ''' | + | '''Technical data''' |
| − | * | + | * Drive: direct drive |
| − | * Motor: | + | * Motor: quartz-controlled, phase-locked DC motor |
| − | * | + | * Speed: 33 1/3, 45 rpm |
| − | * | + | * Synchronous speed variation: 0.025% WRMS (JIS 5521), ± 0.035% (IEC 98A) |
| − | * | + | * Rumble noise ratio: |
| − | ** IEC 98A | + | ** IEC 98A unweighted: 56 dB |
| − | ** IEC 98A | + | ** IEC 98A rated: 78 dB |
| − | * | + | * Turntable: Injection moulded aluminium, 332 mm |
| − | * | + | * Operating mode: Fully automatic |
| − | * Pitch: | + | * Pitch: ± 6 |
| − | * | + | * Tonearm: Tubular arm, statically balanced |
| − | ** | + | ** Needle support: 0 - 2.5 g |
| − | ** | + | ** Effective axis length: 230 mm |
| − | ** | + | ** overhang: 15 mm |
| − | ** | + | ** offset angle: 22 |
| − | * | + | * pickup: [[Technics EPC-207 C]] [[MM]] |
| − | ''' | + | '''Special Features''' |
| − | * | + | * Automatic recognition of the record size (IR) |
| − | == | + | == Remarks == |
| − | * | + | * The covers of the Technics SL-1200MK2/1210MK2, which are still available new for about 50€ to 60€, also fit on the SL-1600MK2/1610MK2, if you still have its original hinges. The cover of the SL-1200MK2/1210MK2 is a little bit flatter than the one of the SL-1600MK2/1610MK2 and has a small dome at the back right, where the tonearm mount is located. |
| − | * | + | * The turntable does not have a built-in phono preamplifier and therefore requires an amplifier with a phono input. If the amplifier has only normal line inputs, a small phono preamplifier must be connected between the turntable and the amplifier. These phono preamplifiers are available from about 40 €. |
| − | + | The automatic lift is driven by a separate motor via a small rubber belt. With used devices this rubber is often torn or it has dissolved. Replacement belts are still available today and the replacement of the belt is a fiddly job, but not witchcraft. | |
| − | * | + | * Other models in the same series: |
** [[Technics SL-23]] | ** [[Technics SL-23]] | ||
** [[Technics SL-1300 MK 2]] | ** [[Technics SL-1300 MK 2]] | ||
| Line 67: | Line 67: | ||
| − | == | + | == Pictures == |
| − | * | + | * Image: Technics SL-1610 MK 2 |
| − | [[ | + | [[Image:TechnicsSL1610MK2.jpg]] |
| − | == | + | == Reviews == |
| Line 78: | Line 78: | ||
| − | [[ | + | [[Category:Turntables]] |
Latest revision as of 09:26, 1 October 2018
Data[edit]
General
- Manufacturer: Technics
- Model: SL-1610 MKII
- Type: Record player
- Years of manufacture: 1977 - 1979
- Made in: Japan
- Color: Black
- Power consumption: 18,5 W
- Dimensions: 453 x 149 x 399 mm (WxHxD)
- Weight: 10 kg
- Original price approx.: 990 DM
Connections
- Outputs: 2 x Cinch (cable fixed), 1 x ground connection (fixed)
- Inputs: None
Technical data
- Drive: direct drive
- Motor: quartz-controlled, phase-locked DC motor
- Speed: 33 1/3, 45 rpm
- Synchronous speed variation: 0.025% WRMS (JIS 5521), ± 0.035% (IEC 98A)
- Rumble noise ratio:
- IEC 98A unweighted: 56 dB
- IEC 98A rated: 78 dB
- Turntable: Injection moulded aluminium, 332 mm
- Operating mode: Fully automatic
- Pitch: ± 6
- Tonearm: Tubular arm, statically balanced
- Needle support: 0 - 2.5 g
- Effective axis length: 230 mm
- overhang: 15 mm
- offset angle: 22
- pickup: Technics EPC-207 C MM
Special Features
- Automatic recognition of the record size (IR)
Remarks[edit]
- The covers of the Technics SL-1200MK2/1210MK2, which are still available new for about 50€ to 60€, also fit on the SL-1600MK2/1610MK2, if you still have its original hinges. The cover of the SL-1200MK2/1210MK2 is a little bit flatter than the one of the SL-1600MK2/1610MK2 and has a small dome at the back right, where the tonearm mount is located.
- The turntable does not have a built-in phono preamplifier and therefore requires an amplifier with a phono input. If the amplifier has only normal line inputs, a small phono preamplifier must be connected between the turntable and the amplifier. These phono preamplifiers are available from about 40 €.
The automatic lift is driven by a separate motor via a small rubber belt. With used devices this rubber is often torn or it has dissolved. Replacement belts are still available today and the replacement of the belt is a fiddly job, but not witchcraft.
- Other models in the same series:
Pictures[edit]
- Image: Technics SL-1610 MK 2
