Difference between revisions of "Kenwood KR-5010"
Line 1: | Line 1: | ||
__NOTOC__ | __NOTOC__ | ||
− | == | + | == Data == |
− | {{ | + | {{navigation}} |
− | ''' | + | '''General''' |
− | * | + | * Manufacturer: [[Kenwood]] |
− | * | + | * Model: KR-5010 |
− | * | + | * Year of manufacture: 1979 - 1980 |
− | * | + | * Made in: Japan |
− | * | + | * Color: Silver |
− | * | + | * Remote control: no |
− | * | + | * Power consumption: |
− | * | + | * Dimensions: 471 x 139 x 358 mm (WxHxD). |
− | * | + | * Weight: 8.6 kg |
− | * | + | * Original price approx.: 798 DM |
− | ''' | + | '''Connections''' |
− | * | + | * Number of inputs: |
− | ** Phono MM: 2 | + | ** Phono MM: 2.5 mV |
** AUX: 150 mV | ** AUX: 150 mV | ||
− | ** Tape Play 1, 2: | + | ** Tape Play 1, 2: 150 mV |
− | ** Tape Play DIN: | + | ** Tape Play DIN: 150 mV |
− | ** | + | ** Antenna FM (75/300 Ohm), AM |
− | * | + | * Number of outputs: |
** Tape Rec 1, 2: 150 mV | ** Tape Rec 1, 2: 150 mV | ||
− | + | Tape Rec DIN: 30 mV | |
− | ** | + | ** Headphones (6.3 mm jack, front) |
− | ** 2 | + | ** 2 pairs of loudspeakers |
− | ''' | + | '''Technical Data''' |
− | '' | + | ''Amplifier'' |
− | * | + | * Continuous power |
** 8 Ohm: 2x 45 W (20 Hz - 20'000 Hz) | ** 8 Ohm: 2x 45 W (20 Hz - 20'000 Hz) | ||
− | + | 4 Ohm: 2x 52 W | |
* Dynamic Power Output | * Dynamic Power Output | ||
** 8 Ohm: | ** 8 Ohm: | ||
** 4 Ohm: | ** 4 Ohm: | ||
− | * | + | * Total harmonic distortion: 0.03 % |
− | * | + | * Attenuation factor: 28 at 8 Ohm |
− | * | + | * Frequency Response: |
− | ** | + | ** Preamplifier: |
− | ** | + | ** Power bandwidth: |
− | * | + | * Signal-to-noise ratio: |
− | ** Phono MM: | + | ** Phono MM: 82 dB |
− | ** AUX, Tape: | + | ** AUX, Tape: 105 dB |
− | * | + | * Stereo channel separation: |
− | + | * Tone control: | |
− | * | + | ** Bass: ± 10 dB at 100 Hz |
− | ** Bass: | + | Treble: ± 12 dB at 10 kHz |
− | + | * Loudness: yes | |
− | + | * High Filter: | |
− | * Loudness: | + | * Subsonic Filter: |
− | * High Filter: | ||
− | * Subsonic Filter | ||
* Mute: FM Muting | * Mute: FM Muting | ||
− | |||
''Tuner'' | ''Tuner'' | ||
− | * | + | * Reception: FM, MW |
− | * | + | * Frequencies: |
− | ** | + | ** FM: 87.5 - 108 MHz |
− | + | MW: 525 - 1605 kHz | |
− | * | + | * Frequency response: 20 - 15,000 Hz (+0/-1.5 dB, FM) |
− | * | + | * Input sensitivity: |
− | ** | + | ** FM: 1.7 µV (IHF) |
− | + | MW: 10 µV | |
− | + | Distortion factor: | |
− | ** | + | ** FM: 0.15% (mono), 0.2% (stereo). |
− | * | + | * Signal-to-noise ratio: |
− | ** | + | ** FM: 75 dB (mono), 70 dB (stereo) |
− | + | MW: 50 dB | |
− | * | + | * Channel separation: |
− | ** | + | ** FM: 45 dB (at 1 kHz) |
− | * | + | * Selectivity: (IHF) |
− | + | FM: 83 dB | |
** MW: 35 dB | ** MW: 35 dB | ||
− | * | + | * Equal wave selection: |
− | ** | + | ** FM: 1.5 dB |
− | * | + | * Spurious wave selection: |
− | ** | + | ** FM: 115 dB |
− | * | + | * Image frequency attenuation: |
− | ** | + | ** FM: 100 dB |
** MW: 70 dB | ** MW: 70 dB | ||
− | * | + | * IF attenuation: |
− | ** | + | ** FM: 115 dB |
− | * AM | + | * AM suppression: 60 dB |
− | ''' | + | '''Special Features''' |
− | * | + | * IF band switching Wide / Narrow |
− | == | + | == Remarks == |
− | * | + | * Other models in the same series: |
** [[Kenwood KR-2010]] | ** [[Kenwood KR-2010]] | ||
** [[Kenwood KR-3010]] | ** [[Kenwood KR-3010]] | ||
Line 105: | Line 102: | ||
− | == | + | == Pictures == |
− | * | + | * Picture: Kenwood KR-5010 |
[[Datei:Kenwood KR-5010-2.jpg|1500px]] | [[Datei:Kenwood KR-5010-2.jpg|1500px]] | ||
− | == | + | == Reviews == |
− | * | + | * Review by "Good Old Hifi": [[http://www.good-old-hifi.de/kenwood-kr-5010-ein-receiver-von-1979/]] |
== Links == | == Links == | ||
− | [[ | + | [[Category:Receiver]] |
Latest revision as of 04:21, 20 May 2018
Data[edit]
General
- Manufacturer: Kenwood
- Model: KR-5010
- Year of manufacture: 1979 - 1980
- Made in: Japan
- Color: Silver
- Remote control: no
- Power consumption:
- Dimensions: 471 x 139 x 358 mm (WxHxD).
- Weight: 8.6 kg
- Original price approx.: 798 DM
Connections
- Number of inputs:
- Phono MM: 2.5 mV
- AUX: 150 mV
- Tape Play 1, 2: 150 mV
- Tape Play DIN: 150 mV
- Antenna FM (75/300 Ohm), AM
- Number of outputs:
- Tape Rec 1, 2: 150 mV
Tape Rec DIN: 30 mV
- Headphones (6.3 mm jack, front)
- 2 pairs of loudspeakers
Technical Data
Amplifier
- Continuous power
- 8 Ohm: 2x 45 W (20 Hz - 20'000 Hz)
4 Ohm: 2x 52 W
- Dynamic Power Output
- 8 Ohm:
- 4 Ohm:
- Total harmonic distortion: 0.03 %
- Attenuation factor: 28 at 8 Ohm
- Frequency Response:
- Preamplifier:
- Power bandwidth:
- Signal-to-noise ratio:
- Phono MM: 82 dB
- AUX, Tape: 105 dB
- Stereo channel separation:
- Tone control:
- Bass: ± 10 dB at 100 Hz
Treble: ± 12 dB at 10 kHz
- Loudness: yes
- High Filter:
- Subsonic Filter:
- Mute: FM Muting
Tuner
- Reception: FM, MW
- Frequencies:
- FM: 87.5 - 108 MHz
MW: 525 - 1605 kHz
- Frequency response: 20 - 15,000 Hz (+0/-1.5 dB, FM)
- Input sensitivity:
- FM: 1.7 µV (IHF)
MW: 10 µV Distortion factor:
- FM: 0.15% (mono), 0.2% (stereo).
- Signal-to-noise ratio:
- FM: 75 dB (mono), 70 dB (stereo)
MW: 50 dB
- Channel separation:
- FM: 45 dB (at 1 kHz)
- Selectivity: (IHF)
FM: 83 dB
- MW: 35 dB
- Equal wave selection:
- FM: 1.5 dB
- Spurious wave selection:
- FM: 115 dB
- Image frequency attenuation:
- FM: 100 dB
- MW: 70 dB
- IF attenuation:
- FM: 115 dB
- AM suppression: 60 dB
Special Features
- IF band switching Wide / Narrow
Remarks[edit]
- Other models in the same series:
Pictures[edit]
- Picture: Kenwood KR-5010
Reviews[edit]
- Review by "Good Old Hifi": [[1]]