Difference between revisions of "Tascam DA-30 MK II"
| Line 20: | Line 20: | ||
'''Technische Daten:''' | '''Technische Daten:''' | ||
| − | |||
| − | |||
* Tape Speed: 8.5 mm/sec, (12.225 mm/sec.) | * Tape Speed: 8.5 mm/sec, (12.225 mm/sec.) | ||
* Quantization Bit: 16-bit linear (SP); 12 bit nonlinear (LP) | * Quantization Bit: 16-bit linear (SP); 12 bit nonlinear (LP) | ||
Revision as of 07:57, 29 September 2014
Daten
Tascam Stereo- DAT- Kassettendeck DA-30 MK II
Allgemein:
- Hersteller: Tascam
- Modell: DA-30 MK II
- Typ: single
- Baujahre:
- Hergestellt in:
- Farbe:
- Fernbedienung:
- Leistungsaufnahme:
- Abmessungen:
- Gewicht: 8,5 Kg
- Neupreis ca.:
Technische Daten:
- Tape Speed: 8.5 mm/sec, (12.225 mm/sec.)
- Quantization Bit: 16-bit linear (SP); 12 bit nonlinear (LP)
- Sampling Rate: Recording: 48 kHz/ 44.1 (digital, analog input); 32 kHz (digital input only)
- Frequency Response: 20- 20.000 Hz +/- 5 dB 9 SP) 20- 14.500 Hz +/- .5 dB (LP)
- Signal to Noise Ratio: Better than 92 db
- Dynamic Range: Better than 93 db
- Total Harmonic Distortion: 0.004 % at 1 kHz (SP) .07 % at 1 kHz (LP)
- Channel Separation: Better than 85 db (at 1 kHz)
- Wow and Flutter: Unmeasurable (less than 0.001 %)
- Analog Input: (XLR) balanced, +4 dBm / 10k ohm (RCA) unbalanced, -10 dB V /50k ohm
- Analog Output: (XLR) balanced, +4 dBm/10 kOhm, (RCA) unbalanced, -10 dBV (+6 dBV max)/ 430 Ohm;
- Output Level: 100 mW or more (8- Ohm load)
- Headphone Output: 1/4" phone jack (x1), 100 mW + 100 mW (8 ohm)
- Digital I/O:
- (XLR) AES/EBU (RCA) Coaxial (S/PDIF); Parallel Control I/O Port: D-sub
- 15-pin (female)
- Independent left and right channel
- AES/EBU and S/ PDIF Digital I/O
- Balanced and unbalanced I/O
- 48/ 44.1/ 32 kHz sampling frequencies
- SCMS free recording
- Built-in parallel interface
Bilder
