Difference between revisions of "Teac A-X 800 DC"
| Line 12: | Line 12: | ||
'''Technical data:''' | '''Technical data:''' | ||
| − | + | Output Power: | |
| − | + | 75 watts per channel minimum RMS, both channels driven into 8 ohms | |
| − | + | from 40 Hz to 20 kHz with no more than 0.05% total harmonic distortion. | |
| − | Input | + | 90W + 90W (8 ohms DIN, 71 kHz) |
| − | + | 97W + 97W (8 ohms Dynamic Power) | |
| − | + | 114W + 114W (6 ohms Dynamic Power) | |
| − | + | ||
| − | + | Input Sensitivity/Impedance: | |
| − | + | PHONO | |
| − | + | MM: 2.5 mV/47 kohms | |
| − | + | MC: 250 pV/100 ohms | |
| − | + | CD/VCR, TAPE1/DAT, TAPE2, TUNER: 150 mV/30 kohms | |
| + | MIC: 0.6 mV/47 kohms | ||
| + | |||
| + | Frequency Response: | ||
| + | CD/VCR, TAPE1/DAT, TAPE2, TUNER: 5 Hz — 40 kHz | ||
| + | —3 dB (Line In to SP Out) | ||
| + | PHONO: 20 Hz — 20 kHz £0.5 dB (RIAA) | ||
| + | |||
| + | Total Harmonic Distortion: | ||
| + | 0.05% | ||
| + | |||
| + | Damping Factor: | ||
| + | 30 (1W, 50 Hz) | ||
| + | |||
| + | Output Level/Impedance: | ||
| + | TAPE1/DAT, TAPE2: 142 mV/1 kohm | ||
| + | |||
| + | Signal-to-Noise Ratio (IHF A Network): | ||
| + | CD/VCR, TAPE1/DAT, TAPE2, TUNER: 96 dB | ||
| + | PHONO | ||
| + | MM: 80 dB | ||
| + | MC: 60 dB | ||
| + | |||
| + | Tone Control: | ||
| + | Bass: +/-10 dB at 100 Hz | ||
| + | Mid: +/-6 dB at 1 kHz | ||
| + | Treble: +/-10 dB at 10 kHz | ||
| + | |||
| + | Loudness Control: | ||
| + | —15/—24/—17 dB at 100 Hz/1 kHz/10 kHz | ||
| + | |||
| + | Filter: | ||
| + | High Filter -3 dB at 10 kHz | ||
| + | Low Filter -3 dB at 100 Hz | ||
| + | |||
| + | Muting: | ||
| + | —20 dB | ||
| + | |||
| + | Power Requirements: | ||
| + | 115/230V AC, 50/60 Hz (General Export) | ||
| + | 120V AC, 60 Hz (USA/Canada) | ||
| + | 220V AC, 50 Hz (Europe) | ||
| + | 240V AC, 50 Hz (UK/Australia) | ||
| + | |||
| + | Power Consumption: | ||
| + | 425W (Manual) | ||
| + | 390W | ||
| + | |||
| + | Dimensions (WxHxD): | ||
| + | 435 x 152 x 325 mm (17-1/8" x 6” x 12-13/16”) | ||
| + | |||
| + | Weight (net): | ||
| + | 9.0 kg (19.871 Ibs) | ||
== Remarks == | == Remarks == | ||
Revision as of 16:13, 9 March 2025
Data
Teac Stereo Integrated Amplifier A-X 800 DC
General:
- Brand: Teac
- Model: A-X 800 DC
- Power consumption: 425 watts
- Dimensions (WxHxD): 435 x 152 x 325 mm
Technical data:
Output Power: 75 watts per channel minimum RMS, both channels driven into 8 ohms from 40 Hz to 20 kHz with no more than 0.05% total harmonic distortion. 90W + 90W (8 ohms DIN, 71 kHz) 97W + 97W (8 ohms Dynamic Power) 114W + 114W (6 ohms Dynamic Power)
Input Sensitivity/Impedance: PHONO MM: 2.5 mV/47 kohms MC: 250 pV/100 ohms CD/VCR, TAPE1/DAT, TAPE2, TUNER: 150 mV/30 kohms MIC: 0.6 mV/47 kohms
Frequency Response: CD/VCR, TAPE1/DAT, TAPE2, TUNER: 5 Hz — 40 kHz —3 dB (Line In to SP Out) PHONO: 20 Hz — 20 kHz £0.5 dB (RIAA)
Total Harmonic Distortion: 0.05%
Damping Factor: 30 (1W, 50 Hz)
Output Level/Impedance: TAPE1/DAT, TAPE2: 142 mV/1 kohm
Signal-to-Noise Ratio (IHF A Network): CD/VCR, TAPE1/DAT, TAPE2, TUNER: 96 dB PHONO MM: 80 dB MC: 60 dB
Tone Control: Bass: +/-10 dB at 100 Hz Mid: +/-6 dB at 1 kHz Treble: +/-10 dB at 10 kHz
Loudness Control: —15/—24/—17 dB at 100 Hz/1 kHz/10 kHz
Filter: High Filter -3 dB at 10 kHz Low Filter -3 dB at 100 Hz
Muting: —20 dB
Power Requirements: 115/230V AC, 50/60 Hz (General Export) 120V AC, 60 Hz (USA/Canada) 220V AC, 50 Hz (Europe) 240V AC, 50 Hz (UK/Australia)
Power Consumption: 425W (Manual) 390W
Dimensions (WxHxD): 435 x 152 x 325 mm (17-1/8" x 6” x 12-13/16”)
Weight (net): 9.0 kg (19.871 Ibs)
Remarks
Other models of the same series:
Pictures
